Jump to content
SAU Community

rb30dett or rb26dett  

48 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

hi,

i started getting bits together to build an RB30dett with a gtr head and turbos and can still do so. but i can now get hold of the rest of the gtr engine so im not sure as to what one i should build. its to go into an R32 fourdoor.

If i build the RB30 i have to ceramic coat pistons, drill out head bolt threads, modify cam belt bits, change oil pump etc.

If i build the RB26 i have to work out how to move the oil pickup and use another sump due to the 4wd sump (i have the rb30 sump and ill have my rb20 one but i dont know whats involved in moving the pickup??)

comments please

cheers

daniel

Link to comment
https://www.sau.com.au/forums/topic/111207-rb26dett-or-rb30dett26head/
Share on other sites

rb30/26 for sure, its worth the small hassle. My rb30/25 only has 166rwkw's but compared to my old rb20 which had 159rwkw's it leaves it for dead! The 26 head will be even better! i probably wouldn't waste your time ceramic coating the pistons and save that money for something else!

If i build the RB26 i have to work out how to move the oil pickup and use another sump due to the 4wd sump

You just remove the diff and weld the 26 sump up.

no great drama if the welder knows what they are doing

id do it all myself, but will the R32 gtr sump fit into the R32 gtst body? i thought the steering setup was different?

Mr RB are you running everything stock or what mods do u have on the RB30/25? as to the ceramic coating, i wont be running oil squirters so for future modding im fair sure ill need it.

any other comments on power/torque.

its a hard driven street car thats on the track for drift/motorkana/sprints about once a fourtnite

cheers

Edited by =premo=

Thats probably not the best example to use as far as power figures go, 100 or so kw missing.

rb30/26 for sure, its worth the small hassle. My rb30/25 only has 166rwkw's but compared to my old rb20 which had 159rwkw's it leaves it for dead! The 26 head will be even better! i probably wouldn't waste your time ceramic coating the pistons and save that money for something else!

Dont suggest you destroy sump/diff in which you can get good money for, can buy aftermarket sump/pickup from High Energy. Probably wont cost you much buy the time you sell yours.

You just remove the diff and weld the 26 sump up.

no great drama if the welder knows what they are doing

Get in contact with BU5TER, he would be the man to talk to as he has done it, he just doesnt dream about it and then throw his 20 cents in. He will be able to advise you about everything.

hi,

i started getting bits together to build an RB30dett with a gtr head and turbos and can still do so. but i can now get hold of the rest of the gtr engine so im not sure as to what one i should build. its to go into an R32 fourdoor.

If i build the RB30 i have to ceramic coat pistons, drill out head bolt threads, modify cam belt bits, change oil pump etc.

If i build the RB26 i have to work out how to move the oil pickup and use another sump due to the 4wd sump (i have the rb30 sump and ill have my rb20 one but i dont know whats involved in moving the pickup??)

comments please

cheers

daniel

hmm, to add to the confusion, building the full RB26dett would cost me less than building the RB30/26. a good friend has the bottem end, i already have everything else ( except forged pistons and gaskets ), i already have the RB30 but still need oil pump, water pump, pistons, gaskets. the 30 will cost more due to ceramic coating, cam belt setup, tuning and other eletrical bits. the RB26 will need a few bits replaced but will be like a simple rebuild, not much tuning needed. either way ill be putting it together with darren from lewis engines so porting, preping rods crank, shot pinging, boaring, honing etc will only take up our time not money.

premo, there's no need to ceramic coat unless you wish to race (track) it, only then would I consider.

The cost of it all will be pretty much the same as you use the same water/oil pump as you would on the 26.

Depending on your use... make your decision. If its motorkhana rb30 all the way, if its purely track work.. well I'd have to say I would go the rb26.

If I were to spend 900 on a nice ATI balancer only then would I go the rb30 for track work. :D

i havnt done many track days but i am drifting more and more, well every chance i get now that i have a lil bit of a tyre sponsor.

how hard does the stock RB26 rev (where does the power level off)?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...