Jump to content
SAU Community

Recommended Posts

I have few sets of wheels for sale 14" , 16" , 17" , 18" .

14" * set of 4 ATS Made in Germany with new tyres on it .Pair of Bridgestone grip II 3000 km & pair SAVA 600 kms. all 185x55 ? 50? .Only tyres by sell cost me 360 plus fitting . Price for sale 300$

post-18510-1168042174.jpgpost-18510-1168042259.jpg

16" x7 set of 4 Tecnocast japaneese aftermarket 5 x114.3 offset +49 will check later , no tyres 420$

post-18510-1168042309.jpg

16" x7 set of 4 Sparco Racing 5x114.3 wheels in white & blue with Bridgestone potenza3 tyres 95% tread on them . 600$ with tyres or 400$ wheels only

post-18510-1168042415.jpgpost-18510-1168042485.jpg

16" x8 1/2 NEW set of two-only GIUGIARO DESIGN wheels 5x114.3 never been fitted tyres on them $200

post-18510-1168042921.jpgpost-18510-1168043166.jpg

16" x7 of 31+ ,x8 of , set of 4 - IMPUL RS HOSHINO RACING jap 3 pieces 5x100 , no tyres .All wheels coming with center caps etc. 380$

post-18510-1168043642.jpgpost-18510-1168043670.jpgpost-18510-1168043704.jpg

16" stock R32 Skyline wheels , no tyres $260

16" stock R32 Skyline wheels , recently new powdercoat in white , no tyres $ 390

16 " Z32 /300 zx stock wheels no tyres $ 290

16 " stock S15 Silvia wheels , no tyres $ 320

16" VOLK racing wheels , ultra light 3 pieces 5x100 , no tyres $ 600

17" x 7 set of 3 ONLY Volk engeneering racing 5 multistud 5 x 100 no tyres 50 $ each or set for 100$

post-18510-1168043961.jpg

18" x8 set of 4 with 235x40x18 -2 Bridgestone POTENZA G 3 tyres and 2 TRAMPIO with plenty of thread left 5x114.3 - 1200$

post-18510-1168044334.jpgpost-18510-1168044381.jpgpost-18510-1168044420.jpg

Some set of wheels are for sale or swap ,I am looking for some air tools - saw ,drill , rachets ,gasket sender,

Chest drawer tool box , bearing drawer prefered.

hand tools - stubby spaners , thread taps , cordless drill etc .

180sx hardtop rollcage, silvia sun roof rollcage, or any parts of interest show me what You got.

All prices are for pick up , but can post interstate on buyers expenses or if buyer organise freight will packed them free of charge.

Any reasonable offers by PM ill be considered .More pics in posts below. Best to contact me by PM.

post-18510-1168043515.jpg

post-18510-1168043558.jpg

Edited by familka gtr
How do you have so many wheels from so many cars? Why only three Volks? You just joined 2 days ago, and it's mighty suspicious!

Dont you mean 1yr and 2 days ago-putz :D

18" *x 8.5 + 17 offset fr. and 9.5 + 19 rear deep dish set of 4 Koening japaftermarket with Nakang 235x45 front 80% thread rear inside gone 1800$

All prices are for pick up , but can post interstate on buyers expenses or if buyer organise freight will packed them free of charge.

Pictures tomorrow

They sound phat... awaiting pics.

How do you have so many wheels from so many cars? Why only three Volks? You just joined 2 days ago, and it's mighty suspicious!

I have bought a strut brace for a 34 from familka_gtr and had no probs. Nice guy too. :D

Hi interested in these - 17" * x7 fr. and x 8 rear set of 4 BBS style multistud 4x 114.3 and 5x114.3 oiffset + 45 .No tyres 450$ - waiting for pics and where are you from??

Edited by c33_rake
How do you have so many wheels from so many cars? Why only three Volks? You just joined 2 days ago, and it's mighty suspicious!

Are You working for federal police or migration office ?You have too many questions .

That is pictures of 17" Volks racing wheels 5x100

16 " Tecnocast 5x114.3 -Skylines 32,33,RX7,SW20 MR2,S15,300ZX etc

post-18510-1143536906.jpg

post-18510-1143537208.jpg

post-18510-1143537590.jpg

post-18510-1143538594.jpg

post-18510-1143538803.jpg

Edited by familka gtr
LOL, sorry! My mistake!

Where did you migrate from, and where's your work-visa? =-p

And obviously I am not on work -wisa .I am on my grandma pension.She died 3 years ago but dont tell nobody .Centerlink dont know yet.

All good mate.

Edited by familka gtr
Thanks mate.I remember You sorry forgot Your name.I am getting older.

17" BBS style

18" Koenig

Haha. Peter here. Atleast you have an excuse. I forgot your name too, otherwise I would have posted it. :huh:

  • 3 weeks later...
  • 1 month later...
  • 3 weeks later...
I have few sets of wheels for sale 14" , 16" , 17" , 18" .

14" * set of 4 AMG Made in Germany with new tyres on it .Pair of Bridgestone grip II 3000 kms and pair SAVA 600 kms. all 185x55 ? 50? will check later .Only tyres by sell cost me 360 plus fitting . Price for sale 340$

16" *Two Sets of 4 - R32 5 x 114.3 stock turbo , wheels rims only 320$ set

16" *x7 ?? set of 4 Tecnocast japaneese aftermarket 5 x114.3 offset +49 will check later , no tyres 450$

16" *x7 ?? set of 4 * R33 skyline 5x114.3 no tyres , no damaged 290$

16" * x7 and x 7 set of 4 VOLK racing wheels 5x100 I believd even they has sticker 5x114.3 on them , 3 spoke in white in very good condition with tyres .Two has 95% and other two 60% tread. 600$

.

17" * x 7 set of 3 ONLY Volk engeneering racing 5 multistud 5 x 100 and 5x ???

no tyres 80 $ each or set for 160$

All prices are for pick up , but can post interstate on buyers expenses or if buyer organise freight will packed them free of charge.

Any reasonable offers by PM will be considered.

any 18's left???

cant get a 4th volk by any chance?

jr

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
×
×
  • Create New...