Jump to content
SAU Community

Recommended Posts

Hey all,

after tuning the boost controller im now chasing more power and revability.....

Im looking at the just jap 3" mild steel dump pipe, i already have a catback (something like 4inch ha), pod, boosted it etc, just dump pipe and maybe cat later down the track

The dump pipe is only $195 and is it a good one? wat else is on the market for that money?

And can anyone estimate the power increase? the jj boys said it would increase midrange from freeing everything up.... skylineaus opinion please..

thanks

ed

Link to comment
https://www.sau.com.au/forums/topic/111409-dump-pipe-rough-estimate-please/
Share on other sites

damn theres some big increases to be made from the split pope BATMBL is selling... its double the price though..... hmmmmm i wonder wat the kw difference is between that and the jj one.....

greddy make split dumps they look very good, you can see the split from the outside though i dont know how long they are but its just the normal dump pipe size maybe 30cms if lucky but it must work they use them on all there cars!!

Have fitted two split dumps supplied by the BATMBL this week, one also with a high flow 3" cat upgrade, defenetaly made noticable difference to both cars, highly recommended. Just remember you get what you pay for.

Hey all,

after tuning the boost controller im now chasing more power and revability.....

Im looking at the just jap 3" mild steel dump pipe, i already have a catback (something like 4inch ha), pod, boosted it etc, just dump pipe and maybe cat later down the track

The dump pipe is only $195 and is it a good one? wat else is on the market for that money?

And can anyone estimate the power increase? the jj boys said it would increase midrange from freeing everything up.... skylineaus opinion please..

thanks

ed

i have already fitted a split dump from just jap, I have found a little more thottle response. check the ACT thread nightmare install!! for some photos of the job, I also heat repped the hole dump (not in photo yet)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...