Jump to content
SAU Community

Recommended Posts

one of my best mates just recently had to fix the gearbox in his series 1 R33 gts-t. I rang around everywhere looking for a secondhand box to replace his stuffed one.

why are people asking stupid prices for secondhand box's?? I mean really $1500 is the average price of a secondhand box, to which no-one can actually asure you of its condition 100%.

so after many phone calls, a phone call was made that put him onto competition gearbox's (i think that was the name) in Melbourne, who rebulit his gearbox for only $1400.

This gearbox that was rebuilt, couldnt even select first or second gear. Both those gears were completely replaced, hubs a all, aswell as 4th gear hub too. "one of the worst 33 box's he's seen" he was told.

So if a gearbox in such poor condition can be rebuilt at a cheper price than a secondhand item, surely this shows people are putting too much value on a 33 box (series 1 or 2...there the same). the average rebuild for a crunching gear or something would be even less dollars i'd imagine.

so anyone looking round at a secondhand box as the cheaper option to fixing your current one, definatly look into rebuilding, as it will probably be cheaper, an you can be sure of its actual condition afterwards.

all of a sudden, just because theres more r33's around, the price of there parts are all jacked up...dont seem fair...but thats life i guess, ultimatly you choose wheather you pay the high prices or not.

(note: we replaced the gearbox with the car up on jack stands in a garage, although it can be done....looking back I would have rathered payed $100-$150 to have someone else do it....lol)

cheers

Link to comment
https://www.sau.com.au/forums/topic/111560-why-are-people-asking-so-much/
Share on other sites

yeah its all about the damand for them.

almost every tom dick and harry with a S13 or r32 with decent amount of power and drives there car hard (or drifts it). is after an Rb25box

they are quite strong....and sinse many people are after them....they can jack the prices up and people will pay them

Sure if you have one rebuild it.

But that's not what is forcing the prices up, it's the guys that DON'T have one, who need one, that is causing the demand to exceed the supply and thats' what pushes the prices up.

:P cheers :rofl:

Sure if you have one rebuild it.

But that's not what is forcing the prices up, it's the guys that DON'T have one, who need one, that is causing the demand to exceed the supply and thats' what pushes the prices up.

:P cheers :rofl:

yeah I guess thats fair enough, I still think there a little overpriced. Seeing some people advertising them for more than $1500. I think round the $1000 is more around what there 'actually' worth, but as mentioned, only takes a few buyers to pay the higher prices.....an whats the prices go up an up.

hopefully, being theres not a great deal of drifting around in Vic for the next 12months or more, the prices of things like this will drop with less demand.

yeah I guess thats fair enough, I still think there a little overpriced. Seeing some people advertising them for more than $1500. I think round the $1000 is more around what there 'actually' worth, but as mentioned, only takes a few buyers to pay the higher prices.....an whats the prices go up an up.

If people are prepaired to pay that much, they arent overpriced.

As Sydneykid said, its all about supply and demand.

If i could be bothered i'd draw you a diagram as i just left my economics class... It doesnt matter what an item is 'worth', whatever someone is willing to pay is how much the item will cost.

Its those guys in Silvias :):down:

It's all their fault :O:O

Should be banned from buying Skyline stuff :P:O

Skyline parts belong ONLY on Skylines :yes::yes:

:D cheers :D

So what about me? BTW, I paid $1400 for a full box delivered to my mechanic with the yoke.

$1500 dollars to rebuild a rb25 gearbox? With new gears? I'd like to get that done to mine.

I am a mechanic, at a Nissan dealership (at the time) when I rebuilt my gearbox. Try over $1000 dollars just for all the bearings, at mates rates. You cant get gears for under $300, and syncros's start round $100. If I could have got my hands on a box for $1500 I wouldn't have been able to get the cash fast enough. The stress alone of checking and assembling a gearbox is worth that sort of money! (Especially a tight tolerance box like the rb25)

I dare say your mates box was repaired, not rebuilt. There is quite a big difference.

Another point, its quite possible that a factory assembled second-hand gearbox is going to be friendlier and better in the long run than a half assed repaired box. No one builds things as well as the crew at nissan!

I think it's very expensive.. almost worth getting a 3,200 brand new box.. and reco'ing and selling off your old one..

When reco'ing the box however - I doubt your gonna be replacing too many gears would you unless you've absolutely fcuked it..?

out of interest.. what exactly happened to it btw - what was he doing..

over $1000 worth of bits and pieces have already gone into my auto box

RE4RO1A.

in the end im looking at $3000 to rebuild my box.maybe more

not standard parts though.

IMO unless you buy a BRAND NEW box, your just buying someone elses problem.

i blame the vl's....they save so much on their crappy shells, they can afford to pay top dollar

for a rb25 g/box and engines.

Edited by RSTME

lets just say that a lot of the time the front wheels tend to do a lot less kms than the rear.....:)

an not all the gears were replaced, only first & second gears, a few syncros, an 3 gear hubs. no point replacing stuff that doesnt need to be.

not that it matters, but both myself and my freind are mechanics & priced up the rebuild kits through nissan at employee prices, an yeah, it was expensive.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...