Jump to content
SAU Community

Recommended Posts

What brand is it? Different colour wires for different brands.

Basically it's one wire for power, one wire for ground and one wire piggy backing off the O2 sensor wire coming off the dump pipe. Best to make the join at the ECU pin out. (number 29 I think...can someone please confirm?)

Not sure why but I had a mate that bridged it at the O2 sensor at the dump pipe and it shorted his stock ECU. Besides, it's much easier to run a wire from your dash/ A pillar to your stock ECU rather than run a wire through your firewall and onto your sensor.

i agree with paul i have one and it does nothing good but jump all around when driving and nothing much else, get a oil temp or a water temp they are much more usefull in drive and knowing whats going on under the bonnet

If you have had a look at the wire on top of the 02 sensor it is thin as you would want to be very careful you dont cut it off.

i dont completly agree with paulr33 on this issue. yes in most cases it's not that great but when you are giving it to the car it does give you a good indication of how rich/lean your car is running however in day to day driving its crap like "let me drive" said it does just bounce all over the place

it will not give you an accurate representation of "rich" or "lean" im afraid. its too narrow and slow for anything "human" usesful. it is for ecu closed loop feedback to save fuel ecomony and nothing else. i certainly wouldnt use the value reported on the guage for anything other than a giggle factor when you boot it, cos all its going to do is show "rich" when you do, which if course is fairly obvious, of course its rich.

try a wideband sensor in the car with a guage and watch the difference, then its worth it. by all means do it, just dont expect anything useful from the guage other than rich lean bouncing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...