Jump to content
SAU Community

Recommended Posts

Hi,

I've noticed of late that when I go from first to second I get a crunch - regardless of if I'm pushing it or not (occasionally it doesn't happen though). From any other gear to second there's no crunch, and from second to any other gear is also crunchless. Actually, it's more of a feeling than a noise and it feels like one part is going faster than another. Once you get it in gear, it's fine.

Could this be the clutch playing up, or something in the 'box itself?

My previous car had a 3rd gear crunch for ages and it was OK. Mind you a new gearbox (or clutch for that matter) is worth more than the car itself. Is this likely to be a problem, or just a nusience?

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/
Share on other sites

Ok, sounds like a plan.

1) What fluid should I use.. Some sort of castrol oil I imagine, but what sort?

2) How do I change it? (lol!)

3) Would I be better off paying someone to do it, or is it a simple thing? I kinda want to learn how to do small maintenance tasks by myself.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189207
Share on other sites

I have the same problem , car has now done 56,000kms and is due for a g/box oil change .

I jacked both sides of the car (with poxy car jack grr) put car stands under them went to the shed to get 1/2" drive ratchet to undo the drain plugs , couldnt find it DOH !

I bought some VMX80 Castrol oil to go in as others have had good results with it . If it doesnt solve the problem i'll look for the redline oil .

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189247
Share on other sites

Gearbox oil will help but won't cure it altogether. It's a very common problem on these cars, it's just worn synchro's, probably from too many Japanese boy racers flat-shifting before it arrived here. Redline heavy weight shockproof oil is the stuff to use if crunching is bad, if it's not too bad then try the light weight.

I find on mine that it crunches a lot less after the gearbox has warmed up. Until then I find that I can help stop crunching by not going straight into second from first, but going to the centre first (ie, where the gate for 3rd and 4th is). I can also stop crunching by doubling the clutch, but it's easier to do it the former way.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189279
Share on other sites

Ok. So first port of call is gearbox oil. I'll try some VMX80 first and it there's no luck, go to Redline. If nothing else, the VMX80 will clean out the box. I believe 3.8 litres is the magic number here :-)

Now, (to prove my general ignorance of car mechanics), I assume the drain plug is on the bottom of the gearbox. And it would make sense that the fill hole is up the top of the gearbox. Just where abouts is it?

I think I might do it next weekend when I go to my old's place.. They have some ramps I can use to hold the car up and enough tools to get by.

I had the clutch replaced as part of buying the car, 'cause during testing it would slip under heavy load. And now there's this gearbox crunching... Perhaps I should look at changing the diff oil too?

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189345
Share on other sites

The Redline Shockproof Gearbox Oil is great stuff. Its very expensive but the quality is right there! It loosened up 1st and 2nd and i haven't had a 4th crunch yet.

One problem I am having though and i thought putting the redline gearbox oil would fix it but im starting to think its a clutch problem... hopefully someone could advise me.

About 5 times now (in 5mths) I have had this grinding type noise in 1st + 2nd only with the clutch is in. I can be upshifting, downshifting or just sitting at the lights and this noise will appear.

3 of these times its happened within 1km of driving so I was thinking maybe something is just abit cold and give it abit longer to warm up although Saturday night on my way home from the Palm Beach cruise (drove 100+ km that night) the noise was appearing in 1st+2nd it didnt matter how much driving the car had done.

The noise is quite loud and the first time it happened I sh1t myself, pulled over and switched off the car, infact that time I think I had it in neutral and the only way to stop the noise was to turn the car off (the noise continued for about 5sec after the ignition was off i guess as the engine/gearbox/whateva was winding down).

Does anybody have any idea what this noise is?

Its starting to scare me and its quite embarressing when you pull up at a set of lights in a nice looking car only to have this LOUD grinding noise appear. The clutch feels really nice and ive only ever dropped 1 proper burnout the rest is just hard accellerating in 2nd + 3rd + 4th and it feels fine to me.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-192647
Share on other sites

I have the same problem!

going 1st to second i have to give it a shake in neutral before going to 2nd when the gearbox is cold and once it's warm it's pretty much OK.

Will i have to use differnet oil cause my gears have a shortened/quick shifter in it ?

Also... where are the seals?

As mine leaks a tiny bit of oil... not enough to hit the concrete, but you get a faint whif under high load from under the Shifter boot... and it's not the nicest smell.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-193095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
×
×
  • Create New...