Jump to content
SAU Community

Recommended Posts

Brand New T4 Turbo • Great for T4 setups and Conversions

1527.jpg

aaaarx73_a.jpg

SPECS:

a.. .60 - T COMPRESSOR WHEEL

b.. " STAGE V BRAND NEW "

T04 " P "

1.05 A/R TURBINE HOUSING

GREAT FOR RAPID SPOOL!

a.. COMPRESSOR HOUSING A/R .60 TO4E

b.. INDUCER 2.324" / MAJOR 3.00"

I bought the turbo to put on my Rb20 but since ran out of funds so staying with my t04e i currently have.

Looking for $600 for the turbo, i got it from the USA and cannot fault it except the fact it doesnt have a name brand name stamped on it

These turbo's work great for the price i have been running mine on 16psi for the past 12 months without fault an have done 18000k's on it.

Item is in brisbane availible for pickup or i can post it for a extra charge

Edited by murrayis
Link to comment
https://www.sau.com.au/forums/topic/113136-t4-turbo/
Share on other sites

HAHA i got that same turbo off ebay with a stainless manifold and 50mm wastegate for 400 bucks all up, gave the turbo away.

Its called a t60, get some good ones and some bad ones, My brother put it on his truck and its running fine.

They are designed off truck turbos and called rotary turbos. There is nowhere to bolt or V band a dump pipe, need to weld a dump on or tap a vband on. :P

They are made in china and sold by xspower in the states.

Exhaust housing is good for 13b not nissan 2.5 or 2.6, unless boost at 6500rpm is ok with you.

Link to comment
https://www.sau.com.au/forums/topic/113136-t4-turbo/#findComment-2092256
Share on other sites

well i am jsut saying from my experience there fine, and i treat mine like a cheap bit of shit lol and it loves it

so yea still up for sale, reduce the price too $500 i jsut want ot get rid of it

Link to comment
https://www.sau.com.au/forums/topic/113136-t4-turbo/#findComment-2111717
Share on other sites

sorry but i think it might have to do with the install of some ppl i have a super t70 and i have run 22psi with it and i have not had any problem at all i have noticed the diffrence in turbo as i seen a t70 purched recently and there is a huge diffrence with mine and the new ones (very dodgy)

dude gl with the sale

haha v band come with them and mine is bigger and boost @3500 you might wanna get facts b4 you start bullshyt

i might have someone intresed ill pm you if he is keen

Edited by teazn_r33
Link to comment
https://www.sau.com.au/forums/topic/113136-t4-turbo/#findComment-2126699
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...