Jump to content
SAU Community

Recommended Posts

COOL so manual it is, now all i need is a good car to start with or get one with mods.

So what does one look out for when buying an R33????????

do the tests i mentioned.

mechanical inspection

compression test

panel beater inspection

and take it for a drive etc obviously.

look in the FS section, there's been a shit load of series 2's for sale atm....and always a lot of series 1's.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I live in Tas.

As to modding it over time, WHIFE+CHILD+HOMELOAN=DO IT NOW, or never do it at all. like i said i have a total of no more the 17k, but prefer to only spend 15k.

How many k's on the odo is too many to bother with.

Also what are the things to look out for (i have asked and no responce)

The thing is i have looked at so many cars, i am LOST. plus i can't seam just to do a search in the forum for just R33 skylines.

As to what to look out for, i mean things that are commonly wrong with skylines or things to check for that have and haven't been done?

are you even reading the replies people are giving you?

if you're looking to spend $15k on a car, then pay insurance, and have a max budget of $17k, what mods do you think you're going to get?

if you're aiming for 200rwkw on that budget, sorry, but you're dreaming.

you'll need full turbo back exhaust

front mount

boost controller

and probably an ECU..

there goes your budget.

best bet is to find a cheap series 1, chances are it will have exhaust and front mount already.

YES i have been reading, and being a mech engineer 90% of the stuff i have got lined up for wholesale prices, and installs are free.

KKR-430 turbo is $820 deliverd

full 3" ex with hiflo cat and dump pipe is $880

Intercoller is $480 deliverd

Filter and CAi setup, $100

APEXI SAFCII for starters $320 from the US

Boost controller $45

Boost guage plus Mix guage and pod $220 form the US

FPR $100

wheels and brakes i already have.

all the other bits i make myself

Edited by WogsRus

^^^

That's actually pretty good.

There isn't much difference between series 1s and 2s, if you can get a s1 in better condition go for it.

That said, i've seen PLENTY of s2 R33 manual, turbos go in your price bracket of 15-17k. Just wait for the right one.

a skyline will cost you much more money then you think.

do ELABORATE.

I am not to sur as to what will. I have a 207kW ATW magna, all the work was done myself. I have doen PLENTY of atmo engines, this will be my first TURBO.

COOL so manual it is, now all i need is a good car to start with or get one with mods.

So what does one look out for when buying an R33????????

There is a thread that covers all the things when buying a car although most of it is gibberish talk when you have no clue about cars (like me). I suggest you grab a mate who knows his Skylines and head out. When I bought my car I looked at two cars that day. One was from Power Rd, it went OK but inside it had some little issues, also at the back the car had some screws thing embedded into the boot floor... might have been involved in a crash.. who knows.. it also didnt have ABS breakes. In the end I chose the second car from SSV, it looked like it was well looked after and my mate aprooved it too... it was an auto... im lazy so auto is perfect for me... if you want manual then get manual, dont buy the car that u dont want...

the car that you found in carsals looks like a good buy, and will save you some money as there are already some mods on it. Also i noticed that in your parts list there was nothing about an ecu. Im just wondering if you are intending to purchase one of these at a later date or are you going to do without. My preferance would be to buy a power fc, but they cost 2k with the hand controller included.

the car that you found in carsals looks like a good buy, and will save you some money as there are already some mods on it. Also i noticed that in your parts list there was nothing about an ecu. Im just wondering if you are intending to purchase one of these at a later date or are you going to do without. My preferance would be to buy a power fc, but they cost 2k with the hand controller included.

they're like $950 brand new and delivered...add $400-$500 for tuning...

i will get an SAFCII for starters and the stock ecu fixed up.

After that is all done i am not going to use a PFC but propably a full Motec or Wolf 3D

fix up the stock ECU? what do you mean?

the R33 ECU isnt like the 32's....the 32's can be remapped etc, but to do that to the 33's costs more than an aftermarket ECU apparently.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...