Jump to content
SAU Community

Recommended Posts

COOL so manual it is, now all i need is a good car to start with or get one with mods.

So what does one look out for when buying an R33????????

do the tests i mentioned.

mechanical inspection

compression test

panel beater inspection

and take it for a drive etc obviously.

look in the FS section, there's been a shit load of series 2's for sale atm....and always a lot of series 1's.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

I live in Tas.

As to modding it over time, WHIFE+CHILD+HOMELOAN=DO IT NOW, or never do it at all. like i said i have a total of no more the 17k, but prefer to only spend 15k.

How many k's on the odo is too many to bother with.

Also what are the things to look out for (i have asked and no responce)

The thing is i have looked at so many cars, i am LOST. plus i can't seam just to do a search in the forum for just R33 skylines.

As to what to look out for, i mean things that are commonly wrong with skylines or things to check for that have and haven't been done?

are you even reading the replies people are giving you?

if you're looking to spend $15k on a car, then pay insurance, and have a max budget of $17k, what mods do you think you're going to get?

if you're aiming for 200rwkw on that budget, sorry, but you're dreaming.

you'll need full turbo back exhaust

front mount

boost controller

and probably an ECU..

there goes your budget.

best bet is to find a cheap series 1, chances are it will have exhaust and front mount already.

YES i have been reading, and being a mech engineer 90% of the stuff i have got lined up for wholesale prices, and installs are free.

KKR-430 turbo is $820 deliverd

full 3" ex with hiflo cat and dump pipe is $880

Intercoller is $480 deliverd

Filter and CAi setup, $100

APEXI SAFCII for starters $320 from the US

Boost controller $45

Boost guage plus Mix guage and pod $220 form the US

FPR $100

wheels and brakes i already have.

all the other bits i make myself

Edited by WogsRus

^^^

That's actually pretty good.

There isn't much difference between series 1s and 2s, if you can get a s1 in better condition go for it.

That said, i've seen PLENTY of s2 R33 manual, turbos go in your price bracket of 15-17k. Just wait for the right one.

a skyline will cost you much more money then you think.

do ELABORATE.

I am not to sur as to what will. I have a 207kW ATW magna, all the work was done myself. I have doen PLENTY of atmo engines, this will be my first TURBO.

COOL so manual it is, now all i need is a good car to start with or get one with mods.

So what does one look out for when buying an R33????????

There is a thread that covers all the things when buying a car although most of it is gibberish talk when you have no clue about cars (like me). I suggest you grab a mate who knows his Skylines and head out. When I bought my car I looked at two cars that day. One was from Power Rd, it went OK but inside it had some little issues, also at the back the car had some screws thing embedded into the boot floor... might have been involved in a crash.. who knows.. it also didnt have ABS breakes. In the end I chose the second car from SSV, it looked like it was well looked after and my mate aprooved it too... it was an auto... im lazy so auto is perfect for me... if you want manual then get manual, dont buy the car that u dont want...

the car that you found in carsals looks like a good buy, and will save you some money as there are already some mods on it. Also i noticed that in your parts list there was nothing about an ecu. Im just wondering if you are intending to purchase one of these at a later date or are you going to do without. My preferance would be to buy a power fc, but they cost 2k with the hand controller included.

the car that you found in carsals looks like a good buy, and will save you some money as there are already some mods on it. Also i noticed that in your parts list there was nothing about an ecu. Im just wondering if you are intending to purchase one of these at a later date or are you going to do without. My preferance would be to buy a power fc, but they cost 2k with the hand controller included.

they're like $950 brand new and delivered...add $400-$500 for tuning...

i will get an SAFCII for starters and the stock ecu fixed up.

After that is all done i am not going to use a PFC but propably a full Motec or Wolf 3D

fix up the stock ECU? what do you mean?

the R33 ECU isnt like the 32's....the 32's can be remapped etc, but to do that to the 33's costs more than an aftermarket ECU apparently.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • TBH, it sounds like the threads on the bolt are fubar in a specific section. Most likely as you've been working it back and forth it has torn threads out, as you loosen the bolt, this section enters the nut, now you're spinning a round shaft inside the nut, there's no threads here.   Use something similar to a claw on a hammer that will fit either side of the bolt head and try to apply downward force while also undoing it. The idea is to attempt to catch a thread, or just rip the f**ker out. Caution on ripping out, as it could bend/maime/mangle what the captive nut attaches to. If the captive nut is actually okay, you could do the dirty part of cutting the head off the bolt, then cut a slit in the end of the thread that's now exposed and then screw it up and into the area the captive nut is until it falls out the other side. However, this does risk the remainder of the bolt rusting over time and damaging near the captive nut and also making it rust. However, so can cutting pieces of panel work out to access this area if you don't reseal it properly.
    • Well, every piece of information on that part when you track it back to Nitto says it's for a KIT of theirs. It is also designed thicker to be stronger. And they speak about a specific harmonic balancer bolt they supply for the whole setup.
    • Techniques for removing stuck bolts are: hitting the bolt head with a hammer, heating the bolt to red hot then letting it cool and working it back and forth like you are already doing. AFAIK the idea is to try to crush whatever material is stuck between the threads (and heat also melts locktite but that's almost certainly not relevant in this case).
    • Yuh, I think it works with the Nitto gear only. I presume that you're not also using the Nitto gear? Watch the video. Compare the interface between the Nitto gear and washer (on the gear side) vs the stocker and decide if you think the Nitto gear is different from stock there.
    • Liking the new charger, battery all good (I think).   Also like how you can put it in power supply mode too. Will troubleshoot with that sometime soon.
×
×
  • Create New...