Jump to content
SAU Community

Recommended Posts

I wwas looking at getting a Legnum, until I found out about the re-call that Mitsubishi had to do with the VR-4's.

I can't remember exactly why they recalled them (only VR4, Trip-Tronic models) I think it was something to do with the gearbox affecting the brakes, not sure.

Also, DO NOT get one with the Trip-Tronic gearbox. That gearbox is very well known to be a bit weak. It can fail at any km's, and when it does fail (and it will) it costs the GDP of a small african nation to replace/repair.

On the up side though, they are very fast and do look a bit better than the Stagea.

I bought the Stagea because of Nissan's reliability and the size of the cargo area. Both of which are important for a new family.

  • Replies 74
  • Created
  • Last Reply

Top Posters In This Topic

...and you can imagine how many HSV owners went "WTF??? I just got torched by a Magna!" back when I had my Galant lol

When you put them along side a Magna, they are quite different.

I like em, they seem a little cheaper than a stagea, how do they take to modifying????

I spose its a similar engine to the 3000gt which they say is a pain to mod???

hey mate the comment by alexclim on the same engine as 3000gt is wrong, its a 2.5L not a 3L and i do know the 3000gt is pricey to modify as the turbos r tiny and are at their maximum power stock, which requires an upgrade straight away if u want abit more poke.

so do these weigh lots or what? im not a fan of mistubishi's they are really crap quality in the lancers anyway, so i cant see the other models being much better. evo and 3000gt is all i would touch, and even they both have bad points about em.

The quality on mine was fantastic - never had a problem with it. Interior trim is much nicer than the Stagea in my opinion. Will find some pics of mine.

You're right about the motor - it's a big brother to the FTO V6, the GTO V6 is a different motor all together. In the UK, basic mods and higher boost have seen them pull high 12 sec quarters without too much hassle, but after that you need to get bigger turbos.

Mine was manual, and I sold it about a year ago, but cheers for the info. I'd say that by the time we get round to bringing some in, they will have been fixed in Japan anyway.

I still wouldn't get one unless it was a manual. That Mitsi Trip-Tronic is not a good box. I have been told by 3 different mechanics that it randomly fails. Not like a cam belt that can be replaced at 100,000Km, it can go at 50,000, 120,000, 200,000 you can't tell. When it does go, it costs your arm, leg and first born to fix.

If you do get one, make sure it is a manual.

VR4's have been around in NZ for quite a while, so people know all about them over here.

Enough bad, now some good. They do look a lot better than the Stagea, a lot more aggresive in the front. They are a bit lighter and have more power. On the whole a good wagon, except for the gearbox.

This might help..?

They seem to be pretty on par.. The Neo 6 is probably a slightly better option out of the box.

But it doesn't take into account how well they handle and what the interior is like and what not....

compare.html

This might help..?

That's a great comparison.

I was looking at the VR4 (manual of course) before I bought my Stagea and personally I would have preferred it, but I couldn't wait for the import approvals. It was looking like another 12 months at least... this was back in April last year. And the one on carsales (in Newcastle) was just overpriced... oh and an auto (avoid the auto!!!).

Parts availailability and engine is Nissan's biggest strenghts and very hard to go past.

But I'm sure the price and appeal of the Legnum will bring quite a few of them into the country. Hopefull we can rely on some of New Zealand's and the UK's knowledge (check out ClubVR-4) to help them grow. They are a beautiful looking car and on that note, here's some pics from a car that J-Spec was looking at importing...

Although, posting these on SAu feels somewhat sacrilegious!

post-17581-1145614710.jpg

post-17581-1145614824.jpg

post-17581-1145614939.jpg

post-17581-1145615400.jpg

post-17581-1145615758.jpg

post-17581-1145616189.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...