Jump to content
SAU Community

Recommended Posts

Hey guys i recently got this screeching sound whenever i braked and realised that my rotors were all worn down so i went and got it changed along with the pads as well. Thing is after changing em the sound got worse so i went back to my mechanic and he said it was just some new gooey stuff on the rotors coz their new. So he took em apart and he said he did some cleaning to it and the sound would still be there but would be gone after a couple of days of normal driving. He said to give it time to wear the remaining stuff off the rotors and let the pads wear in a bit. Now after more than a week the sound is still there and its really starting to get on my nerves :domokun: It only happens when i brake at this certain level, not too hard or lightly. Its got my mechanic scratching his head as well but im going to take the car into the workshop after easter to get it out checked out yet again. Do you guys have any idea what could be the cause? Or is what my mechanic said true and it will wear off by itself slowly?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/113683-screeching-sound/
Share on other sites

Make sure the face of the surface where the rotor meets the hub is clean and free of debris, i.e. the rotor is perfectly flat against the hub. Give the hub a power over with scotch brite or something alike to make sure the surfaces meet flat.

Similarly for the wheel to rotor surface - clean the back face of the wheel that mates the to rotor.

Have the anti-squeal shims been correctly installed in the caliper between the pistons and brake pad? Have they been installed at all? Has anti-squeal been applied to the shim / brake pad?

What brake pads are you running? are they known to be noisy at moderate braking force?

That's probably a start

cheers

Hi Marcus

Mate I have the same problem. I fitted DBA4000s + RB74s + CRC Anti-Squeal paste on the shims. Worked silently for a few weeks and nowdays the damn brakes squeal on moderate braking. I'm out of ideas - it took a while before they started squealing so I assume the hub + rotor are mated correctly (it was a DIYer).

Could the pads be misaligned? Could it be fluid on the pad? Come to think of it, I may have allowed the *tiniest* drip onto the top of the pad when I bled them the second time?

Grrrr.

I've heard with some brake pads, particularly performance pads, you will get some of the screeching sound. Forget the reason why, but that is what I have heard.

Sometimes it can also be the pads vibrating on the caliper.. to try to compensate for this, you can buy this red goo that goes on the back of the pads (the part that DOESNT touch the rotors) and it hardens up a little, sort of goes rubbery (i THINK), anyways, it is supposed to decrease the sound or get rid of it. I have bought some for my car, but can never be bothered ripping apart my brakes to do it. I've had it sitting there about 3-4 months now hahaha.

I've heard with some brake pads, particularly performance pads, you will get some of the screeching sound. Forget the reason why, but that is what I have heard.

Sometimes it can also be the pads vibrating on the caliper.. to try to compensate for this, you can buy this red goo that goes on the back of the pads (the part that DOESNT touch the rotors) and it hardens up a little, sort of goes rubbery (i THINK), anyways, it is supposed to decrease the sound or get rid of it. I have bought some for my car, but can never be bothered ripping apart my brakes to do it. I've had it sitting there about 3-4 months now hahaha.

Hmm ill ask my mechanic about it tomorrow. Ill update you guys on how it goes =D

I've heard with some brake pads, particularly performance pads, you will get some of the screeching sound. Forget the reason why, but that is what I have heard.

Sometimes it can also be the pads vibrating on the caliper.. to try to compensate for this, you can buy this red goo that goes on the back of the pads (the part that DOESNT touch the rotors) and it hardens up a little, sort of goes rubbery (i THINK), anyways, it is supposed to decrease the sound or get rid of it. I have bought some for my car, but can never be bothered ripping apart my brakes to do it. I've had it sitting there about 3-4 months now hahaha.

The red goo is most likely anti-squeal paste. Once the wheel is off it'd take about 5 minutes per caliper to pull out the pads, squeeze the goo onto the shims, and refit the calipers. Less than an hour all up, start to finish.

Okay... on saturday I pulled apart my brakes and put the stop squeal goo on my brake pads... Ive been on a cruise and also done a bit of driving over the weekend. Both hard and soft. I will say if you have problems with squealing brakes, go buy this stuff. Its red and can be grabbed from your local automotive shop (ie. Repco, Supercheap etc), think it was around 10 bux... there abouts.

I have had little to no squealing.. Every so often i get a quite faint, soft squeal, but other than that... nothing. So I think it seems worth it.

Okay... on saturday I pulled apart my brakes and put the stop squeal goo on my brake pads... Ive been on a cruise and also done a bit of driving over the weekend. Both hard and soft. I will say if you have problems with squealing brakes, go buy this stuff. Its red and can be grabbed from your local automotive shop (ie. Repco, Supercheap etc), think it was around 10 bux... there abouts.

I have had little to no squealing.. Every so often i get a quite faint, soft squeal, but other than that... nothing. So I think it seems worth it.

I applied this stuff, it worked for a few weeks and now it's louder than before... I'm just gonna see how they are after the track day. hopefully i will punish them enough that they will think twice about squealing again :D

Hey guys, update on this is i went back to my mechanic to get it out checked out again. He still couldnt figure it out but finally said something about some sort of shiny glaze stuff that had developed on the rotors?? :) Anyway he ordered me a brand new set of the rotors for me. The new rotors worked great actually for a week.. Hardly any squealling and even if there was it would be very faint. BUT now its back :P Ive been back to him like 4 times now and im not sure i wanna go back again =.= Anyway im gonna go get the red paste stuff u guys mentioned and give it a go.. this is my last hope by the looks of it heh we'll see what happens

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...