Jump to content
SAU Community

Recommended Posts

Theres an drag event coming up for SAUvic soon and I was wondering.....if i get some wide 15 inch drag slicks for the rear of my 33-t can i leave the street steel radial 17's on the front?

I heard ages ago that if you have slicks, they have to be on all 4 corners...any truth to this?

Can I bang the slicks on the back only and enjoy having traction for once?

Or am I destine to take on the 1/4 on my regular street tyres?

cheers

I've emailed heathcote park, but still no reply as yet... :(

Link to comment
https://www.sau.com.au/forums/topic/113743-tyre-regulations-on-the-strip/
Share on other sites

Heathcote is not an ANDRA sanctioned track so you are probably ungoverned on tmixing radials and cross plys. But I've never raced at Heathcote .. anyone who has care to comment?

The ANDRA ruling is that you can mix radials on the front and crossply on the rear until you run quicker than 12.50.

But you really don't want to run radials and crossplies. Try it and you'll find out why in the top end.

Heathcote is not an ANDRA sanctioned track so you are probably ungoverned on tmixing radials and cross plys. But I've never raced at Heathcote .. anyone who has care to comment?

The ANDRA ruling is that you can mix radials on the front and crossply on the rear until you run quicker than 12.50.

But you really don't want to run radials and crossplies. Try it and you'll find out why in the top end.

Last time raced I had my Hoosier X-ply front runners on with the BF Goodrich Drag radials on the rear. It was amusing to watch the ANDR officials comb their regs to find a reason why I couldn't run like that. In short though-they couldn't find one. :) (because there is no rule on that one-and because it's fine as a combo)

As for the radial front/X-ply rear combo-Mr Blond is ,of course, completely correct.

The basic reason is that the radials don't much allow sideways movement of the car on the tyre, whereas X-plys do. What can happen is that the back of the car starts to move around on the tyre-bouncing from side to side, with the front staying put. This can get you into a positive-feedback condition where the bounce from side to side becomes more and more violent, eventually causing the car to sidestep and slide, or roll. Bad bad shit.

Think speedwobbles on a skateboard-but at 100mph plus in a car............. :(

Sean=-)

Just some further question, from a novice :(

Barely street legal tyres, such as Mickey Thompsons (sp?) and Nitto's, are still rigid enough to run daily standard/road front tyres, as these are still classified as a street legal tyre?

It is only when you go to a full drag tyre that you need to comply with the regs?

The only thing that governs the combination of front and rear tyres is the construction type.

Drag slicks, front runners and older (very old..) road tyres are of X-ply, or Bias ply construction. (have a siff about on the web for an in depth explanation and diagrams)

All other tyres are of Radial construction.

Nitto drag tyres, MickeyThompson radials(not the slicks), BFGoodrich Drag Radials and Hoosier Radials are all marginal for street use, but are still radials, and as such you do not need special front tyres to go with them (your normal street rubber is fine).

Hope this helps

Sean

so in a nut shell......I'd be best to look for a set of drag RADIALS for the rear for a little extra grip and to maintain balance of the car.

thanks for all the advise guys, much appretiated!! :)

anyone know where I can find CHEAP 17" drag radials in Victoria?

Theres an drag event coming up for SAUvic soon and I was wondering.....if i get some wide 15 inch drag slicks for the rear of my 33-t can i leave the street steel radial 17's on the front?

I heard ages ago that if you have slicks, they have to be on all 4 corners...any truth to this?

Can I bang the slicks on the back only and enjoy having traction for once?

Or am I destine to take on the 1/4 on my regular street tyres?

cheers

I've emailed heathcote park, but still no reply as yet... :(

Hey mate I have raced at Heathcote heaps of times in my cars. You can run drag slicks on the rear and street tyres on the front with no problems up there.

I've been doing this on my Datsun and its recently gone 11.6/119mph with slicks on the rear and street tyres on the front and it has been straight on the track with no problems at all, top end included. Depends how fast your car is going to go I guess.

Heathcote Park owners have been on holidays the past week.

Put the slicks on and enjoy the G-Forces :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...