Jump to content
SAU Community

Recommended Posts

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105035
Share on other sites

Buy the highest RON rated fuel you can, rather than buying the lower-spec stuff and octane boost it. Octane booster doesn't mix in to the petrol properly, and its only ever designed as a stopgap measure.

If you've tuned your street car to use fuel with a higher RON than what you can easy get at your local petrol stations, then I'd suggest re-evaluating your requirements or purpose of your vehicle.

hi,

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though). And as for the new fuel made by shell which has a bit of ethanol (but has high octane rating),i'm trying to see if it makes sense to safely use optimax + octane boosters.

what are your thoughts?

thanks

rob

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105076
Share on other sites

If your car has a stock ECU it will run fine on 98 Octane. If you want to use an ethanol blend from what I understand the fuel density is different & you need a tune.

If you have an aftermarket ECU get the engine tuned to 98 Octane.

By way on illustration - when they sold the R32 GT-R's in Oz you could only buy 95 Octane...

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2105104
Share on other sites

what you say makes sense but in this case in australia,I think most skyliners are using Optimax and that's only 98ron.. I think it's 101 in japan(i could be wrong though).

Oh, a stock Skyline, or one without a programmable ECU. I hadn't considered that. :(

If the car's stock, then it should be adequate. 101RON would be top-of-the-line fuel; OEMs always design their cars for a wide range of conditions.

If its got a Mines' ECU or something that's tuned more aggressively but can't be retuned locally, I'd probably look at swapping the ECU and retuning instead. I don't like octane booster since there's no guarantee it mixes properly, so I'll avoid it where I can.

I don't think it was designed as a long term solution.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106282
Share on other sites

If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2106835
Share on other sites

  • 3 weeks later...
If im going out for a fast cruise with the boys, i try the Nulon Pro octane boost which brings my knock levels down. This is on top of my 98 octane fuel. However, i prefer to fill it up on Optimax Extreme which is 100 octane and brings my knock down considerable.

hang on... i thought with Optimax, your car shouldn't knock anymore?

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2156957
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2157096
Share on other sites

a higher RON is just a higher resistance to preignition (knock).

tune your car to 98RON (Ultimate, Optimax, Vortex, Synegy) and add a octane booster if you want when you venture to the track or go for a fast cruise with the boys just as an added safety factor. otherwise yeah, "re-evaluate your requirements of your vehicle"

hi,

i'm in melbourne. A few months ago,i enquired and found that Caltex has yet to have 98 ron fuel in melbourne. Seems their Vortex are 95 or something. Has anything changed?

thanks

Link to comment
https://www.sau.com.au/forums/topic/114267-octane-boosters/#findComment-2167733
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...