Jump to content
SAU Community

Recommended Posts

I've done a LOT of reading about what box oil to use in my 33. Castrol VMX80, Syntran and Redline Lightweight Shockproof were the 3 tops selections (Royal Purple was also mentioned a few times).

Well today I bit the bullet as I wanted to change the oil to ensure it was new and in doing so hopefully smooth out or eliminate a clunky feel from 1st-2nd and an occasional grind from 3rd-4th when changing at high revs. I opted for the Redline option as 99% of people who use it SWEAR buy it, and that's in light of the rather high price.

The 2nd problem I had was how much oil would I need. I made many calls and received a WIDE range of responses. The actual truth of the matter is very simple. In my Series II R33 5 speed manual transmission, I did NOT use all of the US Gallon (3.785L's). There's still 3-400ml in the bottle indicating a capacity of ~3.3-3.5L's and this was when the oil started coming back out of the filler hole. We also filled the car on even jack stands front and back to be sure it was filling evenly.

I also purchased a 1L suck and blow as I call it, shown in the pics, which made putting the oil in a total breeze. Some pics are attached and are captioned accordingly.

Now, the important stuff. After going for a drive, there is a noticeable improvement in smoothness through gear changes under normal driving conditions. Under hard driving conditions the improvement is even more noticeable, the box made the dreaded grind noise only once from 3rd to 4th and I'm told that with a few hundred K's the improvements should be greater still, this could also easily be due to a worn clutch. Bottom line, the oil DID make an improvement. It is up to you if you feel that the improvement is worth the $130 or so (if you can get it cheaper awesome but I'm in a regional area and this was available on the shelf today when I needed it).

I'm of the frame of mind that given how long this oil can stay in the box, you might as well spend extra $50-$70 and do it right with a proven oil rather than trying to save that money and not getting as much an improvement from another brand. Having said that, I have not used any other brand and can only give you my impression of this oil.

So the important stuff...

The oil DID make an improvement.

The gearbox takes around 3.3-3.5L.

One US Gallon, WILL be enough to fill the box with some left over.

I now have 3-400ml left over that if someone needs to top up there box, they can contact me and we can work something out.

Now for some pics!(There's a tutorial on these forums about how to change the oil, it's very simple and quite accurate, read that if you're unsure on how to do this).

You will need....

post-23873-1145596562.jpg

Now get under the car...

post-23873-1145596949.jpg

Drain all the oil out and be sure not to lose the plug into the oil as it has a magnetic seal which should pick up all the worn case hardening. Give it a clean, here's some before and after. I imagine this oil was the original stuff 0_0

Before

post-23873-1145597149.jpg

After cleaning

post-23873-1145597193.jpg

When you put the drain and filler plugs back in use some loctite, it's your friend and will ensure your precious fluid stays in.

post-23873-1145597243.jpg

We filled the 1L bottle a few times and pumped it back into the box.

post-23873-1145597341.jpg

Fill it til it starts to come back out the hole then put the filler plug back in and you're done. Now go for a drive and see what you think!

I hope this helps someone and saves them doing all the bs I did to find out what was what =)

Cheers

Edited by ActionDan
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

its only recommended for problem gearboxes as i stated....probably why it was recommended to you...this direct from their website.

http://www.redlineoil.com/products_gearlub...=61&subcatID=20

Edited by DiRTgarage

Ahh, yes, agreed. John did state that given my apparent gearbox wear that this would be suitable. However, most people tend to leane towards changing there oil when they have picked up a crunch, grind or clunk.

So something to bare in mind everyone, cheers DG.

hmm... my gearbox is 10 years old... seems to be in good condition.. doesnt seem to make any crunching or wierd noises....

what oil do you recommend i slap in it ?? I was all set to get the redline until i read the last few posts...

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

So what exactly does Nissan spec for this transmission?

Gear lub viscosity?

GL-4 or GL-5?

LSD or non-LSD?

well from personal experience, i've had it in my series II r33 gts25t for about three years now. when i first bought the car it had some unknown oil in the gearbox and it had the famous 1st to 2nd crunch, especially when cold. ever since then i have run redline lightweight shockproof in the box and it has been smooth as. it actually took about a month for the crunch to completely disappear after putting redline in. i just drained it a few weeks ago and put some more fresh oil in. i'm a fan :D

one...redline do not recommend this product for synchromesh transmissions.

two...experience with this product in a new box.

I think redline's normal manual transmission oil, is redline MT-90, which is what I used in my skyline box. Perhaps use this on newer boxes.

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...