Jump to content
SAU Community

Recommended Posts

I've done a LOT of reading about what box oil to use in my 33. Castrol VMX80, Syntran and Redline Lightweight Shockproof were the 3 tops selections (Royal Purple was also mentioned a few times).

Well today I bit the bullet as I wanted to change the oil to ensure it was new and in doing so hopefully smooth out or eliminate a clunky feel from 1st-2nd and an occasional grind from 3rd-4th when changing at high revs. I opted for the Redline option as 99% of people who use it SWEAR buy it, and that's in light of the rather high price.

The 2nd problem I had was how much oil would I need. I made many calls and received a WIDE range of responses. The actual truth of the matter is very simple. In my Series II R33 5 speed manual transmission, I did NOT use all of the US Gallon (3.785L's). There's still 3-400ml in the bottle indicating a capacity of ~3.3-3.5L's and this was when the oil started coming back out of the filler hole. We also filled the car on even jack stands front and back to be sure it was filling evenly.

I also purchased a 1L suck and blow as I call it, shown in the pics, which made putting the oil in a total breeze. Some pics are attached and are captioned accordingly.

Now, the important stuff. After going for a drive, there is a noticeable improvement in smoothness through gear changes under normal driving conditions. Under hard driving conditions the improvement is even more noticeable, the box made the dreaded grind noise only once from 3rd to 4th and I'm told that with a few hundred K's the improvements should be greater still, this could also easily be due to a worn clutch. Bottom line, the oil DID make an improvement. It is up to you if you feel that the improvement is worth the $130 or so (if you can get it cheaper awesome but I'm in a regional area and this was available on the shelf today when I needed it).

I'm of the frame of mind that given how long this oil can stay in the box, you might as well spend extra $50-$70 and do it right with a proven oil rather than trying to save that money and not getting as much an improvement from another brand. Having said that, I have not used any other brand and can only give you my impression of this oil.

So the important stuff...

The oil DID make an improvement.

The gearbox takes around 3.3-3.5L.

One US Gallon, WILL be enough to fill the box with some left over.

I now have 3-400ml left over that if someone needs to top up there box, they can contact me and we can work something out.

Now for some pics!(There's a tutorial on these forums about how to change the oil, it's very simple and quite accurate, read that if you're unsure on how to do this).

You will need....

post-23873-1145596562.jpg

Now get under the car...

post-23873-1145596949.jpg

Drain all the oil out and be sure not to lose the plug into the oil as it has a magnetic seal which should pick up all the worn case hardening. Give it a clean, here's some before and after. I imagine this oil was the original stuff 0_0

Before

post-23873-1145597149.jpg

After cleaning

post-23873-1145597193.jpg

When you put the drain and filler plugs back in use some loctite, it's your friend and will ensure your precious fluid stays in.

post-23873-1145597243.jpg

We filled the 1L bottle a few times and pumped it back into the box.

post-23873-1145597341.jpg

Fill it til it starts to come back out the hole then put the filler plug back in and you're done. Now go for a drive and see what you think!

I hope this helps someone and saves them doing all the bs I did to find out what was what =)

Cheers

Edited by ActionDan
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

its only recommended for problem gearboxes as i stated....probably why it was recommended to you...this direct from their website.

http://www.redlineoil.com/products_gearlub...=61&subcatID=20

Edited by DiRTgarage

Ahh, yes, agreed. John did state that given my apparent gearbox wear that this would be suitable. However, most people tend to leane towards changing there oil when they have picked up a crunch, grind or clunk.

So something to bare in mind everyone, cheers DG.

hmm... my gearbox is 10 years old... seems to be in good condition.. doesnt seem to make any crunching or wierd noises....

what oil do you recommend i slap in it ?? I was all set to get the redline until i read the last few posts...

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

So what exactly does Nissan spec for this transmission?

Gear lub viscosity?

GL-4 or GL-5?

LSD or non-LSD?

well from personal experience, i've had it in my series II r33 gts25t for about three years now. when i first bought the car it had some unknown oil in the gearbox and it had the famous 1st to 2nd crunch, especially when cold. ever since then i have run redline lightweight shockproof in the box and it has been smooth as. it actually took about a month for the crunch to completely disappear after putting redline in. i just drained it a few weeks ago and put some more fresh oil in. i'm a fan :D

one...redline do not recommend this product for synchromesh transmissions.

two...experience with this product in a new box.

I think redline's normal manual transmission oil, is redline MT-90, which is what I used in my skyline box. Perhaps use this on newer boxes.

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...