Jump to content
SAU Community

Recommended Posts

I've done a LOT of reading about what box oil to use in my 33. Castrol VMX80, Syntran and Redline Lightweight Shockproof were the 3 tops selections (Royal Purple was also mentioned a few times).

Well today I bit the bullet as I wanted to change the oil to ensure it was new and in doing so hopefully smooth out or eliminate a clunky feel from 1st-2nd and an occasional grind from 3rd-4th when changing at high revs. I opted for the Redline option as 99% of people who use it SWEAR buy it, and that's in light of the rather high price.

The 2nd problem I had was how much oil would I need. I made many calls and received a WIDE range of responses. The actual truth of the matter is very simple. In my Series II R33 5 speed manual transmission, I did NOT use all of the US Gallon (3.785L's). There's still 3-400ml in the bottle indicating a capacity of ~3.3-3.5L's and this was when the oil started coming back out of the filler hole. We also filled the car on even jack stands front and back to be sure it was filling evenly.

I also purchased a 1L suck and blow as I call it, shown in the pics, which made putting the oil in a total breeze. Some pics are attached and are captioned accordingly.

Now, the important stuff. After going for a drive, there is a noticeable improvement in smoothness through gear changes under normal driving conditions. Under hard driving conditions the improvement is even more noticeable, the box made the dreaded grind noise only once from 3rd to 4th and I'm told that with a few hundred K's the improvements should be greater still, this could also easily be due to a worn clutch. Bottom line, the oil DID make an improvement. It is up to you if you feel that the improvement is worth the $130 or so (if you can get it cheaper awesome but I'm in a regional area and this was available on the shelf today when I needed it).

I'm of the frame of mind that given how long this oil can stay in the box, you might as well spend extra $50-$70 and do it right with a proven oil rather than trying to save that money and not getting as much an improvement from another brand. Having said that, I have not used any other brand and can only give you my impression of this oil.

So the important stuff...

The oil DID make an improvement.

The gearbox takes around 3.3-3.5L.

One US Gallon, WILL be enough to fill the box with some left over.

I now have 3-400ml left over that if someone needs to top up there box, they can contact me and we can work something out.

Now for some pics!(There's a tutorial on these forums about how to change the oil, it's very simple and quite accurate, read that if you're unsure on how to do this).

You will need....

post-23873-1145596562.jpg

Now get under the car...

post-23873-1145596949.jpg

Drain all the oil out and be sure not to lose the plug into the oil as it has a magnetic seal which should pick up all the worn case hardening. Give it a clean, here's some before and after. I imagine this oil was the original stuff 0_0

Before

post-23873-1145597149.jpg

After cleaning

post-23873-1145597193.jpg

When you put the drain and filler plugs back in use some loctite, it's your friend and will ensure your precious fluid stays in.

post-23873-1145597243.jpg

We filled the 1L bottle a few times and pumped it back into the box.

post-23873-1145597341.jpg

Fill it til it starts to come back out the hole then put the filler plug back in and you're done. Now go for a drive and see what you think!

I hope this helps someone and saves them doing all the bs I did to find out what was what =)

Cheers

Edited by ActionDan
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

its only recommended for problem gearboxes as i stated....probably why it was recommended to you...this direct from their website.

http://www.redlineoil.com/products_gearlub...=61&subcatID=20

Edited by DiRTgarage

Ahh, yes, agreed. John did state that given my apparent gearbox wear that this would be suitable. However, most people tend to leane towards changing there oil when they have picked up a crunch, grind or clunk.

So something to bare in mind everyone, cheers DG.

hmm... my gearbox is 10 years old... seems to be in good condition.. doesnt seem to make any crunching or wierd noises....

what oil do you recommend i slap in it ?? I was all set to get the redline until i read the last few posts...

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

So what exactly does Nissan spec for this transmission?

Gear lub viscosity?

GL-4 or GL-5?

LSD or non-LSD?

well from personal experience, i've had it in my series II r33 gts25t for about three years now. when i first bought the car it had some unknown oil in the gearbox and it had the famous 1st to 2nd crunch, especially when cold. ever since then i have run redline lightweight shockproof in the box and it has been smooth as. it actually took about a month for the crunch to completely disappear after putting redline in. i just drained it a few weeks ago and put some more fresh oil in. i'm a fan :D

one...redline do not recommend this product for synchromesh transmissions.

two...experience with this product in a new box.

I think redline's normal manual transmission oil, is redline MT-90, which is what I used in my skyline box. Perhaps use this on newer boxes.

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
    • Not a terrible idea. But if I ever had concerns that my injectors were sufficiently dirty to be causing me a problem, they would be out of the engine and onto the actual injector cleaner/testing bench.
×
×
  • Create New...