Jump to content
SAU Community

Recommended Posts

I've done a LOT of reading about what box oil to use in my 33. Castrol VMX80, Syntran and Redline Lightweight Shockproof were the 3 tops selections (Royal Purple was also mentioned a few times).

Well today I bit the bullet as I wanted to change the oil to ensure it was new and in doing so hopefully smooth out or eliminate a clunky feel from 1st-2nd and an occasional grind from 3rd-4th when changing at high revs. I opted for the Redline option as 99% of people who use it SWEAR buy it, and that's in light of the rather high price.

The 2nd problem I had was how much oil would I need. I made many calls and received a WIDE range of responses. The actual truth of the matter is very simple. In my Series II R33 5 speed manual transmission, I did NOT use all of the US Gallon (3.785L's). There's still 3-400ml in the bottle indicating a capacity of ~3.3-3.5L's and this was when the oil started coming back out of the filler hole. We also filled the car on even jack stands front and back to be sure it was filling evenly.

I also purchased a 1L suck and blow as I call it, shown in the pics, which made putting the oil in a total breeze. Some pics are attached and are captioned accordingly.

Now, the important stuff. After going for a drive, there is a noticeable improvement in smoothness through gear changes under normal driving conditions. Under hard driving conditions the improvement is even more noticeable, the box made the dreaded grind noise only once from 3rd to 4th and I'm told that with a few hundred K's the improvements should be greater still, this could also easily be due to a worn clutch. Bottom line, the oil DID make an improvement. It is up to you if you feel that the improvement is worth the $130 or so (if you can get it cheaper awesome but I'm in a regional area and this was available on the shelf today when I needed it).

I'm of the frame of mind that given how long this oil can stay in the box, you might as well spend extra $50-$70 and do it right with a proven oil rather than trying to save that money and not getting as much an improvement from another brand. Having said that, I have not used any other brand and can only give you my impression of this oil.

So the important stuff...

The oil DID make an improvement.

The gearbox takes around 3.3-3.5L.

One US Gallon, WILL be enough to fill the box with some left over.

I now have 3-400ml left over that if someone needs to top up there box, they can contact me and we can work something out.

Now for some pics!(There's a tutorial on these forums about how to change the oil, it's very simple and quite accurate, read that if you're unsure on how to do this).

You will need....

post-23873-1145596562.jpg

Now get under the car...

post-23873-1145596949.jpg

Drain all the oil out and be sure not to lose the plug into the oil as it has a magnetic seal which should pick up all the worn case hardening. Give it a clean, here's some before and after. I imagine this oil was the original stuff 0_0

Before

post-23873-1145597149.jpg

After cleaning

post-23873-1145597193.jpg

When you put the drain and filler plugs back in use some loctite, it's your friend and will ensure your precious fluid stays in.

post-23873-1145597243.jpg

We filled the 1L bottle a few times and pumped it back into the box.

post-23873-1145597341.jpg

Fill it til it starts to come back out the hole then put the filler plug back in and you're done. Now go for a drive and see what you think!

I hope this helps someone and saves them doing all the bs I did to find out what was what =)

Cheers

Edited by ActionDan
  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

its only recommended for problem gearboxes as i stated....probably why it was recommended to you...this direct from their website.

http://www.redlineoil.com/products_gearlub...=61&subcatID=20

Edited by DiRTgarage

Ahh, yes, agreed. John did state that given my apparent gearbox wear that this would be suitable. However, most people tend to leane towards changing there oil when they have picked up a crunch, grind or clunk.

So something to bare in mind everyone, cheers DG.

hmm... my gearbox is 10 years old... seems to be in good condition.. doesnt seem to make any crunching or wierd noises....

what oil do you recommend i slap in it ?? I was all set to get the redline until i read the last few posts...

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

Well it seems we have some divided opinion, which is great to see. My point here was to share 'my' experience with the product in the hopes of helping others make a more informed decision.

Others can feel free to note their own experiences with the redline products or indeed any other gearbox product as it can only server to give people more info to use in makig up their own minds.

Cheers

So what exactly does Nissan spec for this transmission?

Gear lub viscosity?

GL-4 or GL-5?

LSD or non-LSD?

well from personal experience, i've had it in my series II r33 gts25t for about three years now. when i first bought the car it had some unknown oil in the gearbox and it had the famous 1st to 2nd crunch, especially when cold. ever since then i have run redline lightweight shockproof in the box and it has been smooth as. it actually took about a month for the crunch to completely disappear after putting redline in. i just drained it a few weeks ago and put some more fresh oil in. i'm a fan :D

one...redline do not recommend this product for synchromesh transmissions.

two...experience with this product in a new box.

I think redline's normal manual transmission oil, is redline MT-90, which is what I used in my skyline box. Perhaps use this on newer boxes.

  • 1 month later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...