Jump to content
SAU Community

Recommended Posts

I'd imagine most prices will increase, there are only 3 companies in Perth registered under the new RAWS, and the amount of work per car has increased, and so will the cost of compliance. Many cars are no longer eliglible, but many now are.

There are good and bad points to the new RAWS, we'll wait and see how it really affects us

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194481
Share on other sites

Phptf is correct , there will be more work and especially paper work to be done.

Cars must be accident free but is still a grey area in what constitutes accident.

Would think it means weld on panels.

Prices on GTIR's have been lower than 20K for some time since more than 1 w/shop has been complying them.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194502
Share on other sites

Originally posted by kidd

phptf???? im new!!? pls explain. anyway where the hell did you get a gtst vspec!!!. yesterday my mate was asking me about R32.5 gtr and i was like yeah rite!!! and he proved me wrong

phptf

Post whore Paul the Fairy

Aka GTST VSpec

Some R33 's came with the active rear diff ( ie . VSpec )

R32.5 wtf ?

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194509
Share on other sites

Originally posted by kidd

on the new raws scheme. will it be possible to bring in modded cars or do they have to be stock. as far as i know grade 4 cars are bog standard/pristine condition

Depends on the auction but yes , Grade 4 is usually close to stock with very minor or no panel repair.

I believe that modded cars will be allowed in but will have to be presented to compliancer in std condition.

This atm even includes exhaust , aircleaners and wheel size.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194510
Share on other sites

I still think the 15 year old rules comply. Basically you can import anything over 15 years with it going through a much more basic compliance. You cant import modified vehicles and compliance them unless returned to stock. According the RAWS you must produce documentation to show you have destroyed the parts concerned, there may be ways around it, but it wont be very economical to import a car with nice rims, exhaust, pod etc etc. Its a bit annoying, but given time things may change and hopefully calm down and get a bit more relaxed, at least they havent canceled imports all together.

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194748
Share on other sites

Originally posted by kidd

cheers ken now check this out www.mines-wave.com. theres a gtr32.5 there(n1). still searching for more info

You will find that is a title that Mines has made up for their modified R32 GTR.

Note things like the ATTESSA pro out of a R33 VSpec which I doubt is something that Nissan has done.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194809
Share on other sites

I hope that more dealers hurry up and get setup for the new RAWS cause the fewer dealers the less competition and the higher the price. The cost to setup and meet ISO9000 Standards is very high and alot of people are getting out of the game, which is good, but we still need more than 3.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-194963
Share on other sites

Also it gets rid of a few dodgy compliance shops. I have heard bad stories of cars not having the air filter replaced (and its colapsed in the airbox), all liquids not being changed (engine oil, brake fluids, etc etc), brake discs and pads not being checked and machined if necesary, tyres not even being replaced. Yet they are signed off by an engineer and the shop still charges the going price for compliance. RAWS is both good and bad in different ways, personally from a qaulity point of view its great, from a modified vehicle point of view its bad. When I imported mine I wanted a bit of fruit, exhaust, wheels etc etc. I'm glad I got a stock one though, as it means it hadnt been thrashed to an inch of life and then stuck on a boat for me to buy. Some japanese are fastidious about their car and will look after it and service it every 5000km's, some just thrash the tits off them and then sell them when they become too expensive to fix. Its always hard to buy sight un-seen. Anyway, going back to RAWS I like most aspects of it, but paul's right unless more workshops complete the ISO std we'll be left paying top dollar. The place that complianced my car is a RAW's workshop I believe (he was going through the process when he complianced mine) and thats Phils Mechanical in Kelmscott, good bloke, see him for a compliance plate if you wanna import under RAW's :)

Link to comment
https://www.sau.com.au/forums/topic/11446-new-raws-scheme/#findComment-195173
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...