Jump to content
SAU Community

High Quality C-spanners $20/ea Delivered

PSI929
 Share

Recommended Posts

PSI929 Explorer

PSI929

Posted
Posted (edited)

Why did my post get deleted? Mods, please contact me if there is a problem with this post and not just delete it without contacting me.

I got a whole bunch of Coilover C-spanners. They are brand new in packet.

If you run coilovers, you NEED C-spanners.

Its good to get 2, as 2 are used when you lock the coilover locknuts against each other . Although not 100% essential. You can still be a butcher and use 1 C-spanner and a big set of pliers to lock them up

Stop ruining your adjustment nuts and use the proper tool!

Quality heavy duty product.

Tested to fit: Cusco, Tein, Tanabe, HKS and more. Every coilover ive tried, it fits.

$20/ea Delivered!

steve1.jpg

Pickup in melbourne available.

for slow replies - PM

for fast replies - 0409936117

do not reply asking for pics, ill put them up later

do not reply asking for price. Go to OPSM and ask for glasses... urgently

do not reply asking for location ^^ as above

Edited by PSI929
PSI929 Explorer

PSI929

Posted
  • Author
Posted

ohlins havent tried! Ive just searched for a pic of ohlins on google, and they look to have the same style adjusting rings. So they should work. You are more than welcome to come around and use my test C-spanners to find out.

For everyone sms'ing me, i dont always reply to sms. Please call

  • 2 weeks later...
  • 2 weeks later...
  • 3 months later...
  • 3 weeks later...
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...