Jump to content
SAU Community

Recommended Posts

hi every body just need some advice from people that know. iam running gt3040 powered rebuilt rb25 with gtr rods , wiseco forged pistons , tomei step 1 poncams and ported head. im running stock hydraulic lifters and valve springs. im wanting to rev the motor past 7000rpm to take advantage of the extra top end this gt3040 turbo gives me. whats a safe red line to have? thanks carl.

Link to comment
https://www.sau.com.au/forums/topic/114722-stock-valve-train-rev-limit/
Share on other sites

Mine was set to 8000rpm.

That was knowing full well it woould see the drag strip, and it did a few times :)

Stock head aswell, not even cam'd

So i cant see why you cant do the same if its still making power.

You have the rods & better bolts, so DO IT

Does anyone know for sure or has had experience when valve float has started to occur in the 25's with whatever modifications they have had done?

Im curious to know if it happens often or not at all, i have yet to see anyone complain about 25det and valve float. Ive heard its a problem in neo25's cause their springs are weaker then the previous models, is that true as well if anyone knows?

Well thats good to hear. Just that were upgrading the springs to some stronger Isky ones for the 25/30 just to make sure..we will be running around 22-25psi outta the 3540. Just wanted to check incase anyone had run into such problems before.

Ok so someone has run into problems...well our redline on the 25/30 will be 7k due to standard harmonic dampner, so with the stronger springs we should be good.

What turbo may i ask were you two running R31Nismoid/turbo87?

Edited by r33_racer

I also ran into valve float at about 21psi. It started around 4k according to my tuner.

That was on an HKS t300s turboed stock cam'ed s1 rb25 making about 240rwkw up top. I've got my rev limit pegged at 7300 more due to worries about the stock rods than the valve train.

im running tomei poncams step 1 252 degrees duration at stock 8.5mm lift. now wouldnt running these cams with stock lift enable me to run similar rev limit to if i had the stock cams still installed??? if im going to run 22psi on hi boost do i need to restrict revs to 7000rpm or can i go to 7300rpm ? without valve float any ideas people???

If installing pon cams I'd recommend upgrading the valve springs to gtr items. With stock lift I'd say you should be able to hit 7500 but you'l certainly find out. Didn't you have a gt 30 with nissan exhaust housing before or am I getting mixed up?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...