Jump to content
SAU Community

Hi-tech Drags This Sat

Butters

By Butters,
in Events

 Share

Recommended Posts

FIL Enthusiast

FIL

Posted
Posted

And yes, I was actually quite keen to see a decent turnout from SAU... You guys have quite a few impressive cars, and the effort you guys put into the [cabin] events was really great to see...

I get a bit sh***y around events like this, cos I spend all season taking photos at the plex, and don't get me wrong, i get into every class that runs, from the junior dragsters to the top fuellers... But I've been into Jap cars since before i got my learners.. and when the Motorplex puts on an event like this one, and the turnout is like it was... It's pretty depressing...

Nizmo Grand Master

Nizmo

Posted
Posted

I normally race in this event and have really enjoyed it ..... not out to win any trophies ..... its just pure fun for me and i really miss it.

But unfortunately now i have a job where im expected to work saturdays.

Also - my car will be up for sale in a couple of weeks so I don't really want to thrash it.

There's a lot of skylines off the road at the moment that usually compete in this kind of stuff ..... we are all itching to get back into it ..... especially me with my new baby ...... a 350Z :( Won't happen overnight but it will happen.

Nizmo Grand Master

Nizmo

Posted
Posted

Last years turnout was fairly big - i remember being in a huge queue to get into the pits ..... then having a huge queue again for scrutineering. Maybe now this hasn't been affliated with CABIN its not getting as much exposure or something? I haven't seen any advertising.

teejay Proficient

teejay

Posted
Posted

Ouch!

President announces it, Mikey you post in the thread, and no one knew?

Gimme a break.

I dont care why you did or didnt compete, but its a shame to see arguably one of the biggest clubs in WA not even bother with it.

Thats not limited to you though, I didnt see many other big name clubs.

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
' date='2 May 2006, 12:38 AM' post='2131348']

Ouch!

President announces it, Mikey you post in the thread, and no one knew?

Gimme a break.

I dont care why you did or didnt compete, but its a shame to see arguably one of the biggest clubs in WA not even bother with it.

Thats not limited to you though, I didnt see many other big name clubs.

ahaha, you couldnt let it just go tomj...

Sneeza Grand Master

Sneeza

Posted
Posted

TJ - Anti-lag didnt compete either according to your post on your forums? So why say it was a shame we didn't? You guys are just as - if not bigger than us. Why are we the ones copping the bad comments for not entering?

Yes Paul posted generally for this and the other plex events, but it was never discussed at our committee meetings that we were entering it because as you can see we got one reply in the thread.

teejay Proficient

teejay

Posted
Posted

We didnt compete as an official club entry because we wernt allowed to enter as a club (one of the reasons i wasnt too keen to elaborate on)

we still had 10 odd guys competing... about 1/8th of the field? i did not see one sau sticker anywhere.

but its not worth an argument, we want to see a bigger and better event, and im sure you do to. so im not going to make this an argument , because end of the day its not. Comments on our forms dont always reflect what we as a club think, but im not going to stop people from expressing.

I think the only argument i could present is that mikeys claim that no one knew is a lie, but thats petty.

Sneeza Grand Master

Sneeza

Posted
Posted

If its so petty - why did you say it? Firstly TJ - Mikey has only been on the committee for a short time and does not know the history. He even told you all that - so I think calling him a liar is a bit harsh. Maybe unsure would be a better description? And secondly the event was never discussed at our meetings, which is why I said we did not know about it.

You said yourself that 'comments' ie threads etc etc on the forums don't reflect the club's position. Same applies here. The thread made about the Sports Compact events was not an indication that SAUWA would be entering. It was an FYI only. I am mildly embarassed that the thread is there, after I strongly defended our decision - but this was based on the fact it was never brought up at a meeting and I checked with the committee before making my comments. But I don't keep track of every thread posted on these forums.

I am annoyed that people are trying to make an example of SAUWA because the event was "maybe" not as good as it could have been due to OTHER factors or whatever the reason is you have all decided to single us out. Does it really matter that we didn't put a club entry in? You are all acting like the world has come to an end.. I am sure you all have more important things going on in your lives besides bagging out a club for not entering a Plex event.

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
' date='2 May 2006, 09:33 AM' post='2131892']

I think the only argument i could present is that mikeys claim that no one knew is a lie, but thats petty.

tj, in all honesty i tottal forgot about that topic and the event... im not lieing, i forgot i have more on my mind than just helping out sauwa...

also as liz mention im new and not fully in the loop about things, as i have miss a few committee meetings.. i was just tring to do the right thing and stick up for the club, i support

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Duncan
      Most women will agree that parking is the most taxing part of driving

      By Duncan · Posted

      Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • Duncan
      NC MX5

      By Duncan · Posted

      On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...