Jump to content
SAU Community

Recommended Posts

  • Replies 240
  • Created
  • Last Reply

Top Posters In This Topic

Class capacity restrictions is one off the top of my head.

Hmm...I should google that up, i guess.

Did Toyota ever use the 7MGTE or 2JZ in the Japanese touring car championship? or did they need to stick with engines around 2.5L due to turbo equivalency regulations?

I am yet to see anyone who is in the RB30 camp tell me exactly why it's better... As per one of my original posts.

Yet every where I turn there's RB26 information thrown in my face. I know which I would be buying if I needed to (rb26), but that's only because I've spoken to several ppl on sau and several workshops that have nothing to do with sau that all tell me to go RB26 for the same or similar reasons as what R32R had mentioned before.

By posting the information I posted earlier I was no way intending there to be a war between the camps. What I want is information from both sides as to why they're better. That's all.

...oh, I also think this sort of discussion would benefit moonie :(

once you've had real life experience with both maybe you'll understand

I've had 330rwkw rb25 and 450rwkw rb30 so maybe I know something about it?

I never argue they are better I never argue they are worse but one thing I do know is that I see a lot of parrots posting about the RB30 down falls that just have no idea :(

You say the reasons they are bad is because of what R32R posts but who on here is building Japanese championship touring car or 3rd quickest GTR in the world mmm that would be bo one and as for it being old technology it doesn't seem to hold me back does it? and I very much doubt the hp Mona is aiming for it would hold her back either but then again neither would a RB25

What I'm trying to say is yeah you may be right but in reality at our level of modifications your arguement doesn't matter

Now this will be a bit hard for me as I don't have the "vocab" needed but...

A few things that were brought up at a workshop I go to were

issues with oil and water?? Something about oil in an RB30 naturally wanting to stay up around the head and come down really slowly... etc etc, and this causing issues with reliability for prolonged use on a track (ie, not 400m sprints).

They also mentioned that there is a way to rectify this, BUT for a track car they wouldn't recommend it. One of the mechanics at the place was actually in the process of building up an RB30 w/25 head. He said if all I want to do is do drag racing, then there's no problem, but he wouldn't use it on a hot day around a track.

Is this all utter crap?

(looking to gain knowledge here, not start fights)

hmmm...

it was something about the oil and water lines (??) in the block that lead up to the head.

It's all too confusing. So many ppl saying different things. I should just buy a GTR :

or copy you Bu5ter but with a manual box :O hehe.

white s2, big engine...I already have the big turbo... yeah, why not! :)

Yeah but Bu5ter's car hasn't scratched the surface of what it is capable of doing, if you toned it down alot you could still have a 400rwkw motor that peaks at 7,000rpm.

There are a million threads about the oil issues RB's have, I think the unmodified RB30 would be excacerbated by the fact it runs 2 large supplies to the head, the RB26 unmodified has 1 blocked off. But again this is all covered in a alot of threads already on SAU.

A good example of RB25 to 30 is 88sil's car (Mark) - the 20Ghad full boost under 3,000rpm (was it 2,500?) and was all over by 6,500rpm. On an RB25 it's more like full boost at 4k, all over by 7500. Hang on will dig up dyno graphs.

... but one thing I do know is that I see a lot of parrots posting about the RB30 down falls that just have no idea :)

But RB30s dont rev, they have weak blocks and the cranks are weak and they wable and resonate and stuff when you rev them harder then 5,500rpm :):O>_<

A 20B would be such a better option, some nice cams and valvesprings so it can rev and a 20B will leave any RB30 for dead

But RB30s dont rev, they have weak blocks and the cranks are weak and they wable and resonate and stuff when you rev them harder then 5,500rpm :):O>_<

Yeah....and why you would put a Holden engine in a Skyline is beyond me. :)

Cubes are for kids who cant play with the other kids on the block...

How about we settle this with a race.

The only gear allowed to be used is 5th gear from a standing still. whoever gets to 100km//h first wins.

But RB30s dont rev, they have weak blocks and the cranks are weak and they wable and resonate and stuff when you rev them harder then 5,500rpm :):O>_<

A 20B would be such a better option, some nice cams and valvesprings so it can rev and a 20B will leave any RB30 for dead

And I'll be taking a drive in a 20B Cosmo soon too. Be nice and I'll invite you.

Enough on the 25 vs 26 vs 30 stuff guys. We're here to commiserate the passing of Moanies highly thrashed and trashed donk and support her on her choice of motive excitement.

And I'll be taking a drive in a 20B Cosmo soon too. Be nice and I'll invite you.

Enough on the 25 vs 26 vs 30 stuff guys. We're here to commiserate the passing of Moanies highly thrashed and trashed donk and support her on her choice of motive excitement.

she will be the fastest chicky on the block. and 20 x faster then roy =)

hello mona

Sorry to hear about you motor.

I got some parts laying around at my shop if you need something. Standard cranks,rods,ETC.

As for the engine, I wouldnt really blame the Tuner.Sounds & looks more to an oil surge which could of been a long thing comming.

As for this rev limit business,I sit on the limiter which is 8200RPM doing my burnouts with the standard motor on 18 psi.As doughboy and buster have seen.I wouldnt blame hitting the rev limiter.

What is you rev limit set on mona and do you have an oil Pressure guage in the car.What oil do you use in your car.

my opinion on the cause is either

-Rod gave up

-Oil surge

For this to be caused by pinging the pistons would of all been rounded on the edges due to detention.

Good luck with your new build.I would stick to the RB25.RB26 if you want to spend the money. I wouldnt recommend going to the RB30 stage till you wanna run in the 9`s.

Edited by MR331307

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...