Jump to content
SAU Community

Recommended Posts

so i have an r32gtst with an automatic transmission (and yes, i like it like that)

about 2 years ago, my brain saw a light bulb and decided to make me fit a large trans cooler which i purchased cheaply from supercheap. it has never given me a problem and works well, and you can feel the warmth coming throug the cooler when you touch it after driving

BUT... instead of mounting the trans cooler in front of the radiator like it said, i decided to mount if in the front bumper on the drivers side, so its like a mirrored location of the stock intercooler. i cut a hole in the guard behind the trans cooler, and made some ducting so that air flows through the cooler, rather than around it.

recently, whilst pondering the damaging effects of a car sitting in traffic in the brisbane summer heat, i decided to make a switch that is in the dash that is connected to my electric aircon fan. when in traffic (or after a hard drive) i turn it on to get some extra airflow through the radiator. it makes a huge difference and i can feel the hot air from the drivers window if i place my hand out.

so it got me thinking (yeah, it hurts)... what if i mount a mini thermo fan onto the auto trans cooler, and wire it up in parallel with the aircon fan, so that when i flick the switch, the transmission is also cooled in those stressful traffic situations?

I did some ebaying (is that a word?) and found some 7" thermo fans that were pretty cheap.. is this going to make any difference at all, or am i barking up the wrong tree here?

any automatic guru's out there that want to shed some light?

thanking you kindly,

Warren

You could give it a go...

Although i'd go for having a direct switch you can control from the cabin...Maybe go for the switches that light up when on so you dont forget to turn it off.....

There are off-the-shelf tran coolers that come with fans already attached but, normally you would have one if the cooler is placed somewhere with limited air-flow.

Yes, the fan will cool the fluids down while in traffic, but if you place it infront of the cooler it may restrict the cooling capabilities of the cooler while the fan is off during cruising speeds. Is the fan reversible (ie. can it suck air)? If the fan is reversible & space permitting I'd place it behind the trans cooler.

But, as Craved suggested if the current position is receiving sufficent air flow I wouldn't think one is necessary.

Great to see someone else is not afraid to voice a positive opinion on an Auto Skyline.

I also prefer the Auto although tricked up and with a 2700RPM high stall converter.

For this reason I have a massive aircond condensor as a cooler with two 12v dc Computer fans on it in place of the original I/C -as heat is the killer of auto's -especially when stalling up on the line :ban:

You cant do enough to keep the trans fluid temps down and prolong the life of the trans as far as I am concerned even if you dont stall it up often.

I'm not opposed to the idea, but just wondering if its needed.

If the car is idling at the lights on a hot day, the trans isnt really generating a lot of heat (this occurs when you torque it up)

If you already have a trans cooler it would have better cooling than a standard car, (and stock autos dont have many problems) and I would be a little worried that the fan might restrict air flow and in effect make it worse when you are driving, and when the trans IS making heat.

I am a big fan of trans coolers (I have one on my auto) but im not sure if the fan will offer a lot of benifits

perhaps not mounting it directly on the cooler itself then and just blowing air onto the cooler. wont cause any restriction of the air flow when moving, and will keep air moving passed it when stationary..

best of both worlds i guess.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
×
×
  • Create New...