Jump to content
SAU Community

Recommended Posts

what grinds my gears? Ministry of Sound Sessions.

missing out on 3-quarters of James Zabiela + Nic Fanciulli.

waiting in line at Metros for an hour freezing my ass off.

last minute decision to go wasnt such a good idea after all (saw Shapeshifters... they were ok but they weren't who i paid my money to go see).

What REALLY grinds my gears is having to fix peoples shithouse drawings that were drawn in AutoCAD and having to fix problems in microstation drawings when the system isn't setup properly and your supposed microstation "administrator" readily admits he knows nothing about the Structural package you are trying to use, yet he sets the system up with so many limitations that YOU CAN'T ACTUALLY DO WHAT YOU NEED TO DO! FFS I'M READY TO BREAK SOMETHING/SOMEONE

wgmg builders who get on your back about the job needing to be done so you drop evrything and head out there and it turns out its not even ready for you waste of a whole morning thanks a$$hole

What really grinds my gears is teh biker in his late 40s up the road with some kind of meth lab in his back shed, every other day theres at least one, "undercover" cop parked in a VE outside my house watching his place, makes me kinda uneasy parking my car a few meters away from him when its so defectable

General attitude of cops in Port Augusta

and how many there are, in southern suburbs u can drive for hours without seeing a cop, there everywhere up here.

What REALLY grinds my gears is having to fix peoples shithouse drawings that were drawn in AutoCAD and having to fix problems in microstation drawings when the system isn't setup properly and your supposed microstation "administrator" readily admits he knows nothing about the Structural package you are trying to use, yet he sets the system up with so many limitations that YOU CAN'T ACTUALLY DO WHAT YOU NEED TO DO! FFS I'M READY TO BREAK SOMETHING/SOMEONE

Muaaa haaa haaa!

I feel so much better now!

I just threw a job in and moved to a different company purely because of the lack of CAD support! I share your pain brother.

(Say G'day to Cham for me if you see him ;) )

Yeah Cham should be out here later today.. I'll pass on your regards :) he's not the Ustn administrator though.. Cham is purely AutoCAD.

Oh.. any vacancies for a Structural Designer at your new place?? I'm sick of this bullshit. I'm the only Structural guy left here as of Tuesday week ;) my colleague is leaving to go to ProMet to work on a nicely sorted out Xsteel system :( (They brought me back from Argyle to try and hold this shitheap together).

Yeah Cham should be out here later today.. I'll pass on your regards :) he's not the Ustn administrator though.. Cham is purely AutoCAD.

Oh.. any vacancies for a Structural Designer at your new place?? I'm sick of this bullshit. I'm the only Structural guy left here as of Tuesday week ;) my colleague is leaving to go to ProMet to work on a nicely sorted out Xsteel system :( (They brought me back from Argyle to try and hold this shitheap together).

PM sent

WGMG is after a hard days work and 5 oclock comes around and you go to the beer fridge and there is NO FRIGGIN BEER because neither of the 2 storeman have filled it!!!!!!

Not happy :)




  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...