Jump to content
SAU Community

Recommended Posts

just wondering...

when have you got the o/d button on?

is it on all the time?

or do you put it in overdrive after 80 or something?

i was driving around with it always on as the light on the dash annoy's me [O/D OFF]

but then today i decided to punt around with it off for a bit and i like the way the car drives/ sounds better.

So...

When do YOU use it....?

Link to comment
https://www.sau.com.au/forums/topic/116208-when-do-you-use-od/
Share on other sites

i drive around with o/d on all the time.

O/D is a fourth gear only selectable in 3rd gear via a 12V solenoid switch.

I too hate the light.

The reason the car sounded better was because at above 60km/h where it would be in O/D, the car was still in a lowered gear and made a better song.

I also use O/D when on the dyno to keep the car in 3rd gear.

I also use O/D when driving 170km/h+.....mainly because I've run out of 3rd by then :D

To be honest, Ive never taken O/D off on the road.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

soz wat i meant was when you are in OD and if you disengages it it down shift to 3rd in turn higher rev. Just a matter of how much torque your car has. The more torque the less u need to change your geards.

This is especially true for a diesel engine.

Dont forget i have a trustworthy Landcruiser 100 series with 1hz rngine tuborcharged intercolled baby!! :)

Im always flicking between O/D on and off........ under 60kmph then I dont see a need of O/D, around 80 then yes, I have O/D on. Going up or down hills I keep O/D off.......... no problem using the gearbox for the way it was designed!

well thats a product to fix that jerking feeling when it changes gears though. especially in an auto.

Its the Nulon uto transmission additive. its really good. I put one in into my lancruiser auto trans when i had it for service and it totally smooth and it change into gears w/o the jerking feeling and very smooth. I recommend it. I even put the additive for the diff and the tranfer case and it cuts the cabin noise by half. I put it into the 2 diffs and the transfer case. it works wonders.

im planning to use the additive on my 260rs when its time to chaange the transmission and dill oil as well as the tranfer case.

Edited by stasis

The POWER button changes shift points and how long gears hold for (shift points really) it doesn't open up the 3 extra cylinders... Maybe it should be called "sport" mode not power?

As far as I know anyway...

Luke

  • 5 months later...

This chart is interesting. Which Series is this for Ian?

My S2 will do 125 kmh on the rev limiter in 2nd gear, quite a bit more then the 110 listed above.

Havent checked the upper limit of the other gears yet.

My series 2 (auto) has no "O/D off" button and no "power" button so I guess that makes the whole "do i leave it on or off?" thing pretty simple :thumbsup:

I think the rationale is that the tiptronic pretty much replaces the other two. Plus it will still hit power mode if I put my foot down hard. But I would prefer the option to use power mode and still have it change gears for me.

I read somewhere that power mode not only changes the shift points, it also makes the throttle more sensitive and generally "feels" more responsive. Thats how it worked on my turbo silvia anyway. :laugh:

I too leave it on all the time except when going down big hills that we have around here. When overtaking I just go, I like the rush between 70 and 140.

**thinking out loud ** ...u definately like speeding tickets and demerits too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...