Jump to content
SAU Community

Recommended Posts

just wondering...

when have you got the o/d button on?

is it on all the time?

or do you put it in overdrive after 80 or something?

i was driving around with it always on as the light on the dash annoy's me [O/D OFF]

but then today i decided to punt around with it off for a bit and i like the way the car drives/ sounds better.

So...

When do YOU use it....?

Link to comment
https://www.sau.com.au/forums/topic/116208-when-do-you-use-od/
Share on other sites

i drive around with o/d on all the time.

O/D is a fourth gear only selectable in 3rd gear via a 12V solenoid switch.

I too hate the light.

The reason the car sounded better was because at above 60km/h where it would be in O/D, the car was still in a lowered gear and made a better song.

I also use O/D when on the dyno to keep the car in 3rd gear.

I also use O/D when driving 170km/h+.....mainly because I've run out of 3rd by then :D

To be honest, Ive never taken O/D off on the road.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

if you dont use OD all the time that means your engine is always operating at high rpms which equals to more fuel consumption

i alwasy use OD all the time with any cars.

Only disengage OD when i want a quicjker responses in gear change for over taking.

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

Incorrect, only at a speed above which the gear box would change up into fourth and then engage the lock up converter will you be using more fuel (higher RPM). True, that fouth would be engaged most of the time during normal driving, but that does not mean that the engine "revs harder" when overdrive is switched off.

To the smarties with manuals, enjoy peak hour won't you!

Cheers

Luke

soz wat i meant was when you are in OD and if you disengages it it down shift to 3rd in turn higher rev. Just a matter of how much torque your car has. The more torque the less u need to change your geards.

This is especially true for a diesel engine.

Dont forget i have a trustworthy Landcruiser 100 series with 1hz rngine tuborcharged intercolled baby!! :)

Im always flicking between O/D on and off........ under 60kmph then I dont see a need of O/D, around 80 then yes, I have O/D on. Going up or down hills I keep O/D off.......... no problem using the gearbox for the way it was designed!

well thats a product to fix that jerking feeling when it changes gears though. especially in an auto.

Its the Nulon uto transmission additive. its really good. I put one in into my lancruiser auto trans when i had it for service and it totally smooth and it change into gears w/o the jerking feeling and very smooth. I recommend it. I even put the additive for the diff and the tranfer case and it cuts the cabin noise by half. I put it into the 2 diffs and the transfer case. it works wonders.

im planning to use the additive on my 260rs when its time to chaange the transmission and dill oil as well as the tranfer case.

Edited by stasis

The POWER button changes shift points and how long gears hold for (shift points really) it doesn't open up the 3 extra cylinders... Maybe it should be called "sport" mode not power?

As far as I know anyway...

Luke

  • 5 months later...

This chart is interesting. Which Series is this for Ian?

My S2 will do 125 kmh on the rev limiter in 2nd gear, quite a bit more then the 110 listed above.

Havent checked the upper limit of the other gears yet.

My series 2 (auto) has no "O/D off" button and no "power" button so I guess that makes the whole "do i leave it on or off?" thing pretty simple :thumbsup:

I think the rationale is that the tiptronic pretty much replaces the other two. Plus it will still hit power mode if I put my foot down hard. But I would prefer the option to use power mode and still have it change gears for me.

I read somewhere that power mode not only changes the shift points, it also makes the throttle more sensitive and generally "feels" more responsive. Thats how it worked on my turbo silvia anyway. :laugh:

I too leave it on all the time except when going down big hills that we have around here. When overtaking I just go, I like the rush between 70 and 140.

**thinking out loud ** ...u definately like speeding tickets and demerits too

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...