Jump to content
SAU Community

Recommended Posts

  • Replies 513
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Yeah Mitch and I were sharing the day - car took a complete pounding as he was in Group C and I was in Group D. Car had no issues (apart from having no boost :nyaanyaa:) but the temperatures were getting a little bit high and uncomfortable by the end of my sessions.

Don't really know who got what times per lap; but Mitch's best was 1:17 and I was slower with 1:19.

For Eastern Creek we'll just keep to the one Group and let the car cool down properly instead of having it go in one group after another :D

Car's going through some TLC at the moment so it's all good :nyaanyaa: And by EC I should have the rest of the gear put in which will make it a whole lot more fun :)

Question to all the seasoned pros out there: If you were going to get serious about the track day... do you go out on every session to get maximum number of laps in, or do you set yourself a number of laps to 1) reduce damage to the car and 2) do your best in those laps.

I'm thinking... going out every session and gunning around the circuit is not only going to be pretty harmful to the car but also on the wallet for fuel :laugh:

James; we left early because the temps were getting a little high yes. Also because we wanted to raise the suspension, but didn't have C spanners to do it with (forgot) so we just settled for that time and packed up.

First time Mitch or I had been to a track day; we went not expecting much; only to see what the car could do. Now we know, we will do what's necessary to make it better and hopefully in the meantime improve on driving skills :)

To Adam; you are right - these are addictive!!!

Question to all the seasoned pros out there: If you were going to get serious about the track day... do you go out on every session to get maximum number of laps in, or do you set yourself a number of laps to 1) reduce damage to the car and 2) do your best in those laps.

I'm thinking... going out every session and gunning around the circuit is not only going to be pretty harmful to the car but also on the wallet for fuel :)

I do the following.

The first session I do 3 warm up laps, get the enginee, brakes and tyres to track temp.

All other sessions I do 1-2 warm up because the car normally still has some temp in it.

Always do 1 SLOW lap cool down and keep the car running for about 5min.

Never do anything more then 10-15min (Summer-Winter) at full go, a street can cant take much more, Brakes and tyres go off and enginee temp gets too high.

Saying that every car is different!

Thanks for that advice Paul.... from that it would seem that our strategy from now on is OK, no more than 1 session at a time.

I think the rather high temps were in fact due to us running in consecutive sessions :)

Thanks for that advice Paul.... from that it would seem that our strategy from now on is OK, no more than 1 session at a time.

I think the rather high temps were in fact due to us running in consecutive sessions :)

just buy a rb30 powered silvia

and just thrash it session after session

it loves

you know what? when I get my debts all paid off in a couple of years, and the price of S13 drops to rock bottom, I'll get myself a banged up silvia and use that as track pig. hehehehhee

I do the following.

The first session I do 3 warm up laps, get the enginee, brakes and tyres to track temp.

All other sessions I do 1-2 warm up because the car normally still has some temp in it.

Always do 1 SLOW lap cool down and keep the car running for about 5min.

Never do anything more then 10-15min (Summer-Winter) at full go, a street can cant take much more, Brakes and tyres go off and enginee temp gets too high.

Saying that every car is different!

and leave your handbrake down for that 5mins :blink:

and ouch! massive crack!!! awesome effort! lol! :)

A few of the guys with Group Buy suspension kits have asked if I can make it to the next track day. So when is it, so that I can lock it into the calendar? Eastern Creek, is that right?

:/ cheers :O




  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...