Jump to content
SAU Community

Recommended Posts

Originally posted by rob77

Launch techniques... mine sucks... whats the best way to get a 2.1 60' time? ........Might be best to let someone like rev210 drive my car next time too, I suck :D

Always 'dump the clutch'.

Feed the throttle as you take off. I start from 3500rpm and have the throttle squeezed to 3/4 by the time the clutch has engaged and within the moment of moving off the line I have full throttle (bout 1/2 second).

I did bunch of 13.5's to go with my 13.4 last time and all around 2.1 60ft.

  • Replies 142
  • Created
  • Last Reply

Top Posters In This Topic

Hmmm

Drag Wars was my first ever effort down the quarter so I suppose it wasnt too bad... My best time of the night which I got a couple of times was 14.1 at about 165k's .... I would have liked to have broken the 13's but I think that a bit of practise is required to do that.... I.E more driver error than car can't perform...

All in all not a bad night....

I never got to see the C-Red car as everytime it run I was drving back to the staging area.... :P

Ok.... My fastest run of the night had these stats :)

Time: 14.108

Top Speed: 165.5 kph

Reaction Time: 1.2 Secs ( later in the night got this down to about 0.6 secs )

60' - 2.35 sec

330' - 6.2

660' - 9.29 sec at 129.93 kph

1000' 11.90

Thanks

Brett

Yeah I think if I get everything right in the one run I should crack the 13's.... I think my problem was trying to get evertything together.... For example one Time I would launch bad but really pickup well from 2 onwards then the next run I would launch really well and then slightly miss a gear or something like that...

I guess that all comes with practise though.... :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...