Jump to content
SAU Community

Rb20 Motor, Gearbox, Etc; Package

rb20inside
 Share

Recommended Posts

rb20inside Community Regular

rb20inside

Posted
Posted (edited)

for sale:

93 rb20det motor package

approx 75,000kms

includes complete motor, gearbox, flywheel, clutch, manifolds, turbo

also included: r32 crossmember, engine mounts, gearbox mount, tailshaft, radiator

all parts included add up to almost a complete front cut

prefer to sell it all together or if to different buyers most parts at once

reply to pm as i dont check the thread much

located near(west) brisbane

if i cant get a buyer does anyone have/know of a cheap s13 or r32 i could put it all straight in?

other parts on offer include:

*microtech LT8S. incudes hand controller, lume, sensors, etc. sold

*3in dump/front pipe (one piece, bell mouth style not split)

*greddy intercooler (some stone damage as expected) includes piping if you want it. $250

*apexi twin chamber bov. $150ono

*z32 hubs and spindles. $100ono

*gtr injectors. sold

*s2 rb25 turbo. guess you could say its blown. has a bit of shaft play and is a bit noisy/squeals. great for rebuild/hiflow. $200

*s14a complete rear cradle (includes cradle, lsd diff, halfshafts, all control arms etc, hubs/5stud spindles, swaybar, rotors, calipers, handbrake cables, etc. $500

Edited by rb20inside
Link to comment
https://www.sau.com.au/forums/topic/117346-rb20-motor-gearbox-etc-package/
Share on other sites
dbo Enthusiast

dbo

Posted
Posted (edited)

microtech LT8S. incudes hand controller, lume, sensors, etc

Whats this worth? Guessing it was on your RB20?

edit: wait the LT8S is traditionally 4x injector 4x spark.. so this doesn't fit on an RB20?

Edited by dbo
rb20inside Community Regular

rb20inside

Posted
  • Author
Posted (edited)

price is $300 for the gtr injectors. condition is fine although i havn't had them flow tested, they came out of a running gtr and were only pulled out as they were replaced by sard 720cc items.

the microtech came from a running rb20det so is a 6 injector/spark output unit. it includes/sliced into a rb20 wiring lume.

now that you mention it i am unsure as to whether its a lt8s or ltx8s (as its at a mate house, sorry guys but i will find out for sure)

i was under the impression the lt8 and older mtx8 were the 4 output units whereas the lt8s was the 6 cylinder unit. but in saying that i've seen a lt8 used on a r32 gtr.

anyway it works with and came from a rb20

after about $1000

Edited by rb20inside
rb20inside Community Regular

rb20inside

Posted
  • Author
Posted (edited)

have checked. the microtech is definitely a LT8S. it can run a 6cyl/output car

anyone got a cheap (non turbo auto??) s13 they dont want?

Edited by rb20inside
Alainuae Apprentice

Alainuae

Posted
Posted

hey mate you still looking for the cheap silvy? i got one ready for a rb20 to drop in. I was about to do the same myself as i have the RB20DET engine and nearly all the parts even the r32 box ready to just go in but im willing to sell the car as is (old ca18de box aswell ripped out) So its ready for the rb20 to go in.

So let me know how much u are willing to spend if you want it and we might work somehting out.

Cheers

Rob

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • Murray_Calavera
      iPad gauge cluster

      By Murray_Calavera · Posted

      First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...