Jump to content
SAU Community

R33 Battery Conversion

vannic
 Share

Recommended Posts

vannic Enthusiast

vannic

Posted
  • Author
Posted

'cause it's got to be the worst possible place to put a battery. not only do you lose valuable space in the already small boot, but you get a significant voltage loss through the cable that runs from one end of the car to the other, meaning that any problems with the charge in the battery is magnifyed.

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted
'cause it's got to be the worst possible place to put a battery. not only do you lose valuable space in the already small boot, but you get a significant voltage loss through the cable that runs from one end of the car to the other, meaning that any problems with the charge in the battery is magnifyed.

Define significant? Has it been a problem for you?

I'd suggest trying to isolate what's wrong before you do that. If it's your battery- get a new one. Otherwise, you could simply upgrade the factory wiring to better quality cable, incl the grounding points too.

That being said, I don't know anyone who's moved their battery from the boot :P

The current location also makes it a lot easier for stereo installs, no need to run cables all the way to the back if the battery is already there.

MANWHORE Grand Master

MANWHORE

Posted
Posted

You clearly have something wrong with your electrical system. Fix that rather than attmepting a bandaid, which probably won't fix it anyway.

If you have a look at the cable, it is a big mofo. Voltage drop is very minimal.

You say that boot is already small. What, do you plan on putting something up on the top battery shelf? hmmm, like maybe a pad of paper? or a book? maybe a pair of undies? coz you won't fit much up there

vannic Enthusiast

vannic

Posted
  • Author
Posted
Define significant? Has it been a problem for you?

I'd suggest trying to isolate what's wrong before you do that. If it's your battery- get a new one. Otherwise, you could simply upgrade the factory wiring to better quality cable, incl the grounding points too.

That being said, I don't know anyone who's moved their battery from the boot :P

The current location also makes it a lot easier for stereo installs, no need to run cables all the way to the back if the battery is already there.

it has been a little bit of a problem for me. if i dont' drive a lot for a couple of weeks, the car does have a bit of trouble starting , but my battery is only about 18 months old and still holds a good charge so that's not my problem.

It is a basic rule of electronics that the longer and thicker the cable/wire coming from a battery, the higher resistance there is,and the higher the resistance, the more voltage is lost through that cable. And obviously the more voltage you lose, the less effective the starter motor will be to crank the engine into life. So instead of you being able to lose say 2 Volts of charge from your battery and still being able to start the car, with the battery so far away you may only be able to lose 1 Volt of charge. Obviously, the more you have hanging off the battery, the more drain you'll get. It's not a huge problem for me, but it does say something that 99% of cars have the battery under the bonnet within a meter of the starter.

Obviously it's not sounding like anyone considers this mod worthwhile

ranicx Veteran

ranicx

Posted
Posted

if its still the standard size batt, then id change it to a slightly larger one, which most cars have. cause it is a small battery.

ive left my car for over 2 weeks before and it had no problems at all starting up. so i think you might have a wireing problem there that would need looking at.

wrxhoon Grand Master

wrxhoon

Posted
Posted

it has been a little bit of a problem for me. if i dont' drive a lot for a couple of weeks, the car does have a bit of trouble starting , but my battery is only about 18 months old and still holds a good charge so that's not my problem.

Just get a bigger battery, the original battery is to small. Even if you put it in the engine bay you will have the same problem

MANWHORE Grand Master

MANWHORE

Posted
Posted

I measured the drop in voltage from the alternator and also at the back. I also did it when the car was off. The voltage drop was negligible. We're talking like 0.2V.

you obviously have an electrical problem like I said above. moving the batt won't fix it.

Could be a dead batt - just coz it's 18 months old doens't mean it's still good. might be too small.

could be bad ground - clean them and make sure they're tight.

could be dead alternator.

I've left my car for 1 month and it still started.

vannic Enthusiast

vannic

Posted
  • Author
Posted (edited)
Thicker cable = less resistance . Thats the reason they use a thick cable .

sorry guys. i got my wires crossed (pun completely intended). thicker cable does = less resistance.

what kind of batteries do others use and where did u get them? regular sales points like beaurepairs and the like don't seem to know much about the skyline's battery. One guy put a regular lead acid battery in it instead of the sealed lead acid type and the thing leaked all in my boot!!! thankfully i fixed that really quick.

Edited by vannic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...