Jump to content
SAU Community

Recommended Posts

A stock NSX might be quicker than a stock GTR around a track, but I reckon a stock GTR N1 or GTR NUR would swing that back the other way. I reckon the N1 might even pip the NSX-R around a track! But this is all opinion at the moment... (Remember Wheels magazine ran a 12.6 quarter mile from an N1 GTR, and Wheels typically run concervative times compared to some international magazines).

And I reckon the Z-tune and 400R etc. are NISMO special models, and a bit unfair to consider them a regular Nissan...

Edited by Big Rizza
  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

2L 4cly 'vs' 3.5L V6...? The S2000 is still the better car. What that s2000 engine does stock is nothing short of amazing. If I had $80k floating about, Id be going the S2000 over almost any other car in that price range any day.

They're still in the same price bracket.

And what the engine "does" isn't that amazing. It uses revs to make power, at the expense of torque in the low to midrange. Bike engines do that all the time, and its not like Honda doesn't have experiencing making them. And the engine does wear out a lot faster due to owners having to rev the tits off them to go anywhere.

And, for all their trumpeting, the F20C doesn't have the highest specific power output of any NA production car engine in the world. That honour belongs to Nissan, with the SR16VE.

Handling-wise, the S2000 is a lot more nimble due to its shorter wheelbase and less weight, but then the back end is also a bit hair trigger. How many people (both private owners and car reviewers) have gone off the road and crashed arse-first into the scenery?

Its also a lot less practical than the 350Z, since not only does it have no boot space and only 2 seats but its also got a cramped interior.

If I had $72K (RRP for the S2000), I'd try and stretch to a decent 3.2L NSX if I could go second hand. If I didn't mind the impracticality and cramped interior, but wanted something nimble and fun to drive, I'd buy a Lotus Elise. If I needed a roof and some comfort, I'd buy a Nissan 350Z Track.

And, for all their trumpeting, the F20C doesn't have the highest specific power output of any NA production car engine in the world. That honour belongs to Nissan, with the SR16VE.

FYI, some specific outputs from some JDM engines -

Nissan SR16VE has 175ps, or 109ps/l

Honda K20A is 220ps from a 2.0, or 110ps/l

Honda B18C-R is 200ps from a 1.8, or 111ps/l

Honda B16B is 185ps from a 1.6, or 116ps/l

Nissan SR16VE-N1 has 200ps from a 1.6, or 125ps/l

Honda F20C has 250ps from a 2.0, or 125ps/l

The N1 limited edition motor should be honoured to make the same ps/l the highest output/l of a mass production motor :woot:

Edited by Lithium

"but wanted something nimble and fun to drive, I'd buy a Lotus Elise."

shoudn`t this be "if had endless amounts of money to spend on gearboxs ..i`d buy a Lotus "

LOTUS ..the biggest turd on the road... but only on the road to get to and from the mechanics :woot:

Erm no contest really. The only thing the VTIR would beat the GTS-T in would be fuel economy. :ermm:

I've been in a VTIR and no, it does not go anywhere near as hard as a GTS-T

no. the VTir would beat the gts-t in handling but then again, they are different sort of cars.

Once's the lil' brother of a legendary japanese muscle car whilst another is the new generation of economical and good handling sort

The Vtir's are a very quick car. As it has been said before, they aren't the best car for drag racing. send them into some twisties or onto a track and they will really shine. being a fwd, point the steering wheel to where you want it to go and it'll go there. where as the 33 skyline is a considerably heavier car and rwd so obviously a lot more toe happy. but the 33 has a lot more power and straight line speed. a integra would most of the time come out of a corner first as having a better weight balance and no lag due to the torquey nature of the vtec engine. a type r would obviously be true to this, but the vtir hasn't got the same kind of power.

Hope that gives you some idea.

well put it this way too. The Vtir has the potential of taking in the B18c7 engine which is the integra dc2 type r's.

having said that you can throw in a rb26dett into ur gts-t but then again, a lot of trouble and parts must follow

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
×
×
  • Create New...