Jump to content
SAU Community

Recommended Posts

Just wondering if anybody here races go karts?

I'd love to race cars but that's too expensive so go karts are the next best thing (& seems the base point for most race drivers)

If anybody has any information they can pass onto me would be great.

Price range of karts (a good starting race kart)

Typical maintenance costs

Licenses, costs.

Good web site resources?

Thanks, :woot:

Edited by geno8r
Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I haven't had any first hand experience but have a few friends that have raced competetively! From what i've been told, it is relatively cheap to gets started but it's the maintainance that kills you! As they are so evenly powered any advantage you can get is vital. But advantages usually come with a price tag. For example, I've been told that if you want to run at the top consistantly you at least have to have a new set of tyres each round and don't think because they small they're any less expensive! So it can get costly, no where near a car mind you.

But they also said if you just want to get out there for some fun wheel to wheel action and aren't conserned with being the next lowndesy, it can be an economical and extremely fun form of motorsport!

I'd love to get into it but as I posted before, I'm tall and heavy so I already have an anoying disadvantage.

Little buggers zipping past me on the straights :woot:

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2162399
Share on other sites

i used to race karts. you can heaps of fun for about $3000. buy a 2nd hand kart and racing gear and get into it. i cant remember how much a club licence/membership is, but it ain't cheap, and you've also got to do some marshalling too. but its all worth it.

if you want to be competitive, then you've got to start spending big dollars and take the time to test and configure your kart to each circuit you race at. tyres, engine rebuilds (after about every 12hrs worth of use!) and basically not stingeing on anything which you might have in the past.....

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2169700
Share on other sites

My mate has raced Karts for about 4-5 years now, I am his pit crew. He used to race sprint Karts(kart below without the big nose cone) the engine was a 100cc Clubman. There is a few engines you can get ranging from size and power, they start from a J to a Clubman to a Rotax125cc clutch or a Leopard. J's and Clubman's are clutchless whereas the others have got clutches. Sprint racing is fun but VERY compeditive, eespecially with the younger guys coming up from juniors. We have stopped racing Sprint and now running a Superkart(pictured below with big nose). Superkarts are run on normal sized tracks, we only run on Mallala over here, but over in Vic i think there is at least Winton and Phillip Island. Superkarts have different classes also they are 80cc G/Box, Rotax 125MAX non G/box(which is what we run), 125cc G/Box and 250cc Internationals(G/Box and faster than V8 Superkart.......No S$#T) We run the 125MAX over here because we get fields of at least 25-30 if not more and it's fun to race.......especially slip streaming!

Below are a few websites i can think of

http://www.kartsportnews.com.au/

Adelaide Superkart Club(just for some info.....obviously your not in SA)

http://www.superkart.net.au/site/index.php

And also i have put in our sponsors Kart Shop Website

http://www.iwt.com.au/default.htm

Sprint Kart

Superkart

My mate in the thick of it at Mt Gambier

My mate has his Sprint Kart up for sale on IWT website.......just a quick plug for it.....LOL

Hope you find all the relative links and information you need and good luck on what you decide!

Darren

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2173220
Share on other sites

  • 3 weeks later...

ive raced competitvely now for around 3 years and find it alot of fun however i know some ppl say its cheap but if u want to race competitvely it can hurt ur pocket iv placed top 10 in nationals 05 n top 5 most wa states for a brand new kart and motor ur looking at around 6 grand 2nd hand u can pick one up for around 2.8-3.5 iv learnt alot of my driving skills from racing karts and intend to race more however very keen to move up to formula fords or saloon cars

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2223488
Share on other sites

i reckon if your just after a cheap thrill every now and then, go to a hire go-kart place. they are expensive, but some of them are actually really close to being "race karts".....

but hey, dont let me talk you out of it. i had a blast when i was doing it....

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2224628
Share on other sites

Guest Mashrock

you can find alot of karts on ebay for under 3000. which seem pretty good.

the local karting track should only cost you 20 or so bucks fro a day or so. or maybe only a yearly membership??

and you supply the rest. fuel etc etc.

i beleive thats how it goes in sydney at picton track.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233240
Share on other sites

I used to race karts a few years ago.

If you are self employed contracting in a physical trade be careful. I broke my hand racing and was out of work for 8 weeks. So it was indirectly very expensive.

I think you need to set a budget for the year and stick to it.

Set up:$5500-$7500 for kart, trailer,suit,wet's,slicks,tools,license,spare engine depending on class.

Running for the year:Anywhere from $1000 up. You could spend $1000 testing and practice and $1000 on select events for the year depending on what you are after.

Another option is running in endurance series. The endurance association lease karts to teams who want to arrive and drive. I thinks it starts around $600 for the team to run in a 6 hr race so it can be cost effective( great idea for skylines australia punters).

Hope it helps a bit

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233413
Share on other sites

make your own

steal your old mans law mower and get a few mates around with some slabs and a welder.

If your reaonably clued on it can be done without massive expense.

Under $1000 i reckon at the worst

Guy i grew up with had 2 home-made go-karts, top fun.

His old man was the first Top Fuel Drag bike to crack a 6.99 back in the 90's aswell.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2233941
Share on other sites

  • 2 weeks later...

I use to race. It was the best fun eva!!!! The club i joined gave you a key to the track when u pay membership which was about $110. Liscence around $280?? Bought my kart off a guy who is now racing formula ford for $1800 with a suit, helmet boots etc. Bought trailer for just over a grand. I was racing Senior National lights, (a J motor 100cc) Wasnt as fast as other classes but just as fun! A set of tyres lasted me a whole season which was pretty good. Race entry was about $50. The money is deffinately worth it!!

Due to lack of funds and time i also have my set up for sale!!

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2260231
Share on other sites

i'm also thinking of gettin a kart, what should one look for when purchasing a 2nd hand kart, in terms of engine life etc.

and what tools etc woudl one need to mantain the kart?

n ofcourse how fast do theses things go? never been in one sorry :unsure:

Edited by Suspense
Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2264436
Share on other sites

When i first started i got by with chain lube, tyre pressure gauge(theres usually a compressor at the track), Hex key set (allen keys), Spark plug spanner, and normal set of spanners or ratchet, measuring tape for track of rear wheels. Then just oil and fuel to mix. I think thats about it! When looking at karts look for cracks in the frame, particularly under the seat or dodgey looking/flaking paintwork.

Most karters rebuild their engines fairly regularly, so check when last rebuild was done, and see if carbies clean and fuel filter used etc..

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2264471
Share on other sites

Not sure what sprint karting is like in the eastern states, but over here after we had the Nationals over here this year it has turned out sh!t, not as many people out anymore, this is why we went to superkarting at the start of last year. After this year we will be moving on again to finnaly race in Improved Production in the car we have been building for a couple of years now!

I would assume over east you guys still get a good represent at sprint meetings tho!

Get into it.....it's great fun, just steer clear of the young kids with fathers that are wankers and you'll be all good, just need to tell them that you race for FUN and don't care if you punt thier young wanna be race car driver off!!!!

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2270484
Share on other sites

If you are really keen you want to look at a 2nd hand rotax max. You can pick karts up to suit what ever standard of racing or a just as a social type of enjoyment.

I currently have 2 karts that i use here in Dubai and i was lucky enough to win the national championship here last year and attend the rotax world champion ship.

If you are going to get a 2nd hand kart a simple test to see if the frame is not twisted or bent is to turn the steering wheel from lock to lock and make sure that the outside wheel comes of the ground about the same distance when you turn from lock to lock. It should pick up either front wheel when this is done, if not then leave it alone you are buying trouble.

Also these days the rotax is the most popular class and they have different weight classes so there is something for everyone. Its a lot of fun but be careful as it is adictive ( highly ) All rotax which are being raced should come with a seal and from this seal you should be able to inquire how many hours of running has the piston done and bottom end for that matter. Ask for the contact details of the engine builder and talk to him they will get you onside quickly.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2287525
Share on other sites

Im looking to get into karting now. Just starting the trail of getting it all organising.

I guess a kart would be a good start. Not looking to be competitive, but to just get out and have some fun. The track here isnt of a very good standard so it looks of more a social affair, which is fine with me.

Looking to go racing Senior National lights class as well I believe it is. Seemed to be about of field of about 6 people in that one when I went out for a look around the other day.

I just think it might get expensive quickly. Just gotta find a semi decent kart first, i have a few numbers of a few shops so that will be the first point of call i reckon.

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2304605
Share on other sites

Just got back into racing karts after a year off and missed every moment of it.....If you are considering getting into it then check out the local tracks and see what the biggest classes are ( usually rotax, clubman or J's) Be wary that with a rotax you need to upgrade to a B grade license b4 you can start from the front of the grid. They usually put C graders and P platers to the rear, this is why a Clubman would be a good start. Don't expect to fast straight away as there is more to setup with chassis than you may think....the first year is usally just for learning :blink: Re. Turbo tim....where are you located? cause if you are in sydney i can hook you up with a kart dealer to talk to. :)

Link to comment
https://www.sau.com.au/forums/topic/117533-go-karts-racing/#findComment-2304669
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...