Jump to content
SAU Community

Recommended Posts

Hi,

My mate just bought a 2002 model 200sx. It is fully standard and is automatic. I was reading that they go 0-100 in 5.6 seconds standard. I have a R32 manual and i read that they go 0-100 in 6.5 standard. The mods i have are:

R34 Turbo - Running on 7psi

Lighten Flywheel

3 Inch Excust

K&N Air Filter

Front Mount Intercooler

I was just wondering if you guys think I can beat him with the mods I have?

Link to comment
https://www.sau.com.au/forums/topic/117627-r32-skyline-vs-200sx/
Share on other sites

Personally i think it will come down to driver.. the auto will be quicker off the mark however it depends on how well you know to drive your car. stock 200sx has around the same rw/kw as a stock R32 however the RB20 should have more torque. The auto 200sx are pretty laggy until 4000rpm... Considering your mods you should be able to get him, if not let me drive your car :) hahaha just kidding... the only way to find out is down the 1/4 mile.

Regards,

Sarkis

You will chop him very very hard with those mods against an stock auto s15. You have manual vs auto, a bigger turbo and modifications done!

Standard the s15 sr20 would have quiet alot more torque than a standard rb20 though Sarkis.

Anyway go and find out mate, im sure you'll be happy with the results :)

Accordin to most dyno's and Nissans figures the sr20 has more torque, maybe due to more compression in the motor or 4 bigger pistons compaired to 6 smaller ones? Who knows but from what ive seen sr20 does have more torque (more noticable off boost than on)

actually remember that in australia the s15 sr20det was detuned from the factory. and in manuel form will do 6.34 and a standing quarter of 14.59.

Australian spec s15 has 147kw and 265nm of torque@48000rpm. Rb20 got few more KW's but same torque. S15 manuel weighs in at 1282kgs.

about the same asa 32

R32 Manuel will do 6.5 and 14.8 quarter. Expect only 0.1 to 0.2 seconds slower for the auto s15.

If your mate got rid of nissans state of detune he would be making 187kw and be running 13.8 quarters.

Youll woop him if you can drive properly if you got those mods you listed

They're no chance in hell a stock S15 can run 5.6 0-100km/h taking into account the car is an australian model and is auto.

The Jap S15 came with a ball-bearing T28 as opposed to the plain bearing of the Aus S15's.

Taking into account your mods I'd say you'd beat him easily. But mate why don't you just go out and have a run? Its all fun and let us know how you go.

Japanese spec S15 manuals ran 0-100 in about 5.6 as you stated - they have 184kw as standard. The Aussie cars were detuned to 147kw, and do 0-100 in low 6's in manual form. The auto's are slower again, with 0-100 in the 7's. A stock R32 GTST manual would chop a stock S15 auto very easily.

But then that raises another question - why are you running LESS boost than a stocker? Dunno too much about modifying cars, but your set up seems good for around 1 bar boost if you ask me! BOOST THAT SUCKER UP!!!

Edited by Big Rizza

Thanks Guys,

Ive ordered a boost controller and should be getting a new fuel pump in the next 18 days. My mate wants to have a drag in about 2 weeks so hopefully I will have it boosted when we drag. Although I should be able to win with it running on 7psi. I wont be happy if he does beat me. I might have to practice my take offs. Could i turn the boost up a bit without the bigger fuel pump?

Thanks

Yeah i will proberly run it on 10psi when i get the boost controller.

But then yesterday when I was driving the metal plate that holds my clutch in position snapped. So now i gotta take out the clutch pedal and cylinders to fix it all up. Hopefully it will be a easy job and somewhere will have the brackets to buy. Has anyone installed a Clutch pedal before?

My mate got his 200sx back the other day and wont take me for a drive. He has taken everyone else but me. I think he doesnt wanna show me how quick it is becasue it might be slower. Im pushing him to take me but my mates who have been in it say that mine is quicker anyways.

Also some how the bracket that holds my clutch twisted and snapped. Not sure if becasue it was mounted wrong or because the heavy duty clutch was to much pressure. I bought a new one which cost me $220, hopefully I wont have the same problem.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...