Jump to content
SAU Community

Recommended Posts

guys

it was drizzlin' a little yesterday. Was driving the car and as i exited the round-a-bout, i gently tapped the accelerator. Now,the bloody tail just slipped .I am getting annoyed with this cause i am only doing like 20km/h.

What do you think is bloody wrong?

running very good tyres on the ride (Bridgestone Potenza Re01s all four) with 70% tread.

HELP!

Link to comment
https://www.sau.com.au/forums/topic/117892-rear-keeps-slipping/
Share on other sites

  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Does this happen in the dry also??

Maybe your tyres have to much pressure in them ie its very hard..

well it happens in the dry only if i go quick.

my tyres on the front are 39psi whilst the rears are 34psi (set accurately cause i have a michelin digital gauge).

Any ideas?

HELP!!!!

Might be useless in this post but on Sunday when it was wet I had 3 people in the car (including me) and I floored it past 6000 RPM and my ass didnt even step out... i got a rear strut and nearly new Pirelli P6s...

well my car has the rear strut and front stabiliser.

Just keep the pedal into it and apply some opposite lock coming out of the corner ;)

I find that in my car as soon as it hits boost in 1st or 2nd gears in the wet it just goes nuts. Also remember it really does depend on what mods you are running on your car as well. Power increase mods obviously get the tail snapping easy. Suspension mods such as coilovers, harder springs/struts will also have a large impact on it as well.

Having three people in the car also probably gives the car less chance of stepping out anyway. More weight over the rear wheels. Also depends if you were coming out of a corner or flooring it down a straight.

Just keep the pedal into it and apply some opposite lock coming out of the corner ;)

I find that in my car as soon as it hits boost in 1st or 2nd gears in the wet it just goes nuts. Also remember it really does depend on what mods you are running on your car as well. Power increase mods obviously get the tail snapping easy. Suspension mods such as coilovers, harder springs/struts will also have a large impact on it as well.

Having three people in the car also probably gives the car less chance of stepping out anyway. More weight over the rear wheels. Also depends if you were coming out of a corner or flooring it down a straight.

\

nah the car is fairly stock - just aftermarket exhaust,air filter and 17 inch wheels.

why you runnin so much pressure??

keep it around 30-32 at most.. Try that and see if it works..

I have a feelin its your tyres..

dude i will try that ;)

as i recall the skylines are to run higher pressure on front tyres because of the engine putting more weight on the car... any thoughts?

waht do you mean??

basically the rear shocks were leaking, and had lost their "shockability".... causing the rear to float allover the road, espescially around corners... and i thought it was my hicas unit playing funny buggers...lol

Edited by danielson
basically the rear shocks were leaking, and had lost their "shockability".... causing the rear to float allover the road, espescially around corners... and i thought it was my hicas unit playing funny buggers...lol

dude

have you got ur car repaired then???

are u sure your not dialing up 6000rpm in 2nd gear then dropping the clutch out of the roundabout?

u must be giving that right pedal a bit of carpet action to get the ass out so easily. i have heard stories of shagged shocks attributing to this though.

are u sure your not dialing up 6000rpm in 2nd gear then dropping the clutch out of the roundabout?

u must be giving that right pedal a bit of carpet action to get the ass out so easily. i have heard stories of shagged shocks attributing to this though.

nope...

she was like 3000rpm - that's why i am getting annoyed.. I mean, i am just granny driving it in the wet (drizzle) and it just f**ks up likethat.

i wantto find out whats wrong or sell the f**king thing.

I was in the wet, with 3 guys in the car including me, was turning right at the lights, took off normally in first when i hit 3000rpm the turbo kicked in and it tailed out, i wasn't doing more than 20kmph myself.

Sounds normal to me :)

How tight was this "roundabout"?

I was in the wet, with 3 guys in the car including me, was turning right at the lights, took off normally in first when i hit 3000rpm the turbo kicked in and it tailed out, i wasn't doing more than 20kmph myself.

Sounds normal to me :)

How tight was this "roundabout"?

yeah mediocre tight... almost needs u to full lock the damn car cause the car is big...

I have similar mods and I have trouble in my R32 with it. Although I do have coilovers :) If its still annoying you just hit third gear instead. I don't think there is anything wrong with your car at all. Just enjoy the nature of a RWD turbo :D

hmmmm yeah but when you slow down, the revs are too low for 3rd gear...

if this is part and parcel of the RWD turbo behaviour then it's fine. I am into learning it.

try on a cold night in a straight line, newish potenza's on stock rims, and some yokohama grand prix tyres on front

slow up to boost, spools, 3.2krpm and floor it, slippppp both tyres and a nice slip light comeing on....

godam comeing onto the freeway am going slow cuase of big winding arc, no one behind me, slow to 20kph and boom floor it, spinning all the way thorugh

oh good. it's just the nature of the car(r33) then?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...