Jump to content
SAU Community

Recommended Posts

guys just a question mates car r33 gtst been ideling very rough just out of the blew and also was over heating now did complete flush change hoses and re apply water and collant to sytem??? anyone got some hints on fnding the acctual problem???

all help will be greatful???

guys just a question mates car r33 gtst been ideling very rough just out of the blew and also was over heating now did complete flush change hoses and re apply water and collant to sytem??? anyone got some hints on fnding the acctual problem???

all help will be greatful???

check for a nasty chocolate milkshake in either oil cap or radiator. Its water and oil mixed, nasty looking shit so you shouldn't miss it.

There is an O2 check that mechanics can do but the car has to be warmed up. They take off your radiator cap and put it in the top of the radiator and if the fluid turns from blue to green then its Farked.

The bubbles as suggested is another.

If it is coughing and farting when you are hard up it and blowing a white steamy smoke.

Check your water resouvour for oil in the bottom. With my Vl didnt realise it was there as the previous owner had painted the bloody overflow bottle so I couldnt see. After I pulled the motor out and tore out the overflow to replace it I saw it there thick as :O .

Those are my ways of looking for trouble..........

Cheers

Imtorqing

dude fark be careful if your car is overheating do not drive it. I did a head gasket about 2 months abo and cost me about 3000 to fix trust me get it to a mechanic and get it fixed before your drive it anywhere otherwise yout could find yourself paying beg money

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...