Jump to content
SAU Community

Recommended Posts

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :nyaanyaa:

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/118652-x-force-exhaust-system/
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

There will be a negligible power difference between X-Force and HKS.

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

And no your car won't need a tune after an exhaust system is fitted.

And from http://www.nengun.com -

HKS Hi-Power catback - AU $ 893.97

HKS polished front pipe - AU $ 308.80

and you'll need a dump pipe too

The xforce exhaust is based on the jap versions cept its made in china so its abit cheaper. They'll make pretty much the same power as all the others..

I've got the 3" xforce on mine and it made about 25kw or so.. slap your car on the dyno would ya cause i wana see what you get with the 3.5" please :nyaanyaa:

mines not to loud at all realy... infact when i took the silencer out i was surprised that it didnt evan get much louder.. it sounds pretty cool though i rekon, not as cool as a wrx though :nyaanyaa:

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

ive got a tanabe cat back, and let me say, tiz quite disapointing noise wise....some people would love the fact taht you get the gain of a 3" exhaust, but the lack of noise upsets me :O

justins xforce sounds tough, so ill be replacing my jap cat back with it shortly :)

1400 is a rip off

xForce Stainless Exhaust System - Skyline R33 GTS-T Price: $950

pay no more than 200$ for fitting

i picked up a mild steel one for 699$ for my old 33

they are louder and more droney than my current trust setup

but they do the job and their cheap .

Edited by arkon
So Xforce is the closest thing you'll get a skyline sounding like a Wrx? Can anyone who has one record some audio of it? I'm shopping for an exhaust atm as well.

skyline sounding like a wrx? maybe if it dropped a cylinder.

The roar of a skyline is far sexier then an wrx.

Wow, my X-force turbo back cost me $650 fitted myself.

From the cat back they are not any worse from a performance point of view but the big name brand cats and dump pipes are usually (but not always) better.

I would like to replace my dump pipe with a proper CES split dump and "high flow" my current x-force cat. The rest if fine.

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :P

Thanks in advance

Edited by JCMarshall_Law

Hmm, I checked with x-force themselves, and another exhaust workshop. The RRP for the system is at $1600. The workshop qouted me a price of $1,500 (including fitting). I checked some of the online stores, but none of them have the turbo back system - they all have cat-back and then I will have to spend extra on the other items like the dump pipe etc. All in all, it comes to over $1200.

Anywhere else I can check around melbourne?

i see that ebay one has had the resonator cut out. wonder how much louder that would make it. i got the same setup but have the resonator in.

to get it sounding a bit different get an oval muffler, like a jasma or a lukey and take out the center resonator. a guy in town has that and it sounds pretty mean. different to most others.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...