Jump to content
SAU Community

Recommended Posts

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :nyaanyaa:

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/118652-x-force-exhaust-system/
Share on other sites

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

There will be a negligible power difference between X-Force and HKS.

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

And no your car won't need a tune after an exhaust system is fitted.

And from http://www.nengun.com -

HKS Hi-Power catback - AU $ 893.97

HKS polished front pipe - AU $ 308.80

and you'll need a dump pipe too

The xforce exhaust is based on the jap versions cept its made in china so its abit cheaper. They'll make pretty much the same power as all the others..

I've got the 3" xforce on mine and it made about 25kw or so.. slap your car on the dyno would ya cause i wana see what you get with the 3.5" please :nyaanyaa:

mines not to loud at all realy... infact when i took the silencer out i was surprised that it didnt evan get much louder.. it sounds pretty cool though i rekon, not as cool as a wrx though :nyaanyaa:

However the exhaust note will be different. Personally I think the X-Force ones sound excessively loud and droney while the JDM branded ones sound better and also quieter.

ive got a tanabe cat back, and let me say, tiz quite disapointing noise wise....some people would love the fact taht you get the gain of a 3" exhaust, but the lack of noise upsets me :O

justins xforce sounds tough, so ill be replacing my jap cat back with it shortly :)

1400 is a rip off

xForce Stainless Exhaust System - Skyline R33 GTS-T Price: $950

pay no more than 200$ for fitting

i picked up a mild steel one for 699$ for my old 33

they are louder and more droney than my current trust setup

but they do the job and their cheap .

Edited by arkon
So Xforce is the closest thing you'll get a skyline sounding like a Wrx? Can anyone who has one record some audio of it? I'm shopping for an exhaust atm as well.

skyline sounding like a wrx? maybe if it dropped a cylinder.

The roar of a skyline is far sexier then an wrx.

Wow, my X-force turbo back cost me $650 fitted myself.

From the cat back they are not any worse from a performance point of view but the big name brand cats and dump pipes are usually (but not always) better.

I would like to replace my dump pipe with a proper CES split dump and "high flow" my current x-force cat. The rest if fine.

Hi All,

Yesterday when I went to pick up my replacement tail lights, I spoke to Wayne at GTAutos, with regards to the x-force exhaust system. It will cost me about $1,400 fitted and is a turbo back 3.5inch system. I tried to do a search to see if there was any reviews on this site regarding that particular model - but couldnt find any. Both wayne and his mechanic, run the system and say it does wonders. It sounds great too. My friend told me that $1,400 can get a good HKS exhaust. Is that true?

My question is, does it really matter what brand the exhaust is? Would something like HKS give out a better power rating? Would the car need a tune or anything if I do end up putting an aftermarket exhaust?

Any advice would be greatly appreciated guys/gals :P

Thanks in advance

Edited by JCMarshall_Law

Hmm, I checked with x-force themselves, and another exhaust workshop. The RRP for the system is at $1600. The workshop qouted me a price of $1,500 (including fitting). I checked some of the online stores, but none of them have the turbo back system - they all have cat-back and then I will have to spend extra on the other items like the dump pipe etc. All in all, it comes to over $1200.

Anywhere else I can check around melbourne?

i see that ebay one has had the resonator cut out. wonder how much louder that would make it. i got the same setup but have the resonator in.

to get it sounding a bit different get an oval muffler, like a jasma or a lukey and take out the center resonator. a guy in town has that and it sounds pretty mean. different to most others.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...