Jump to content
SAU Community

Recommended Posts

  • Replies 83
  • Created
  • Last Reply

Top Posters In This Topic

Hmm, I checked with x-force themselves, and another exhaust workshop. The RRP for the system is at $1600. The workshop qouted me a price of $1,500 (including fitting). I checked some of the online stores, but none of them have the turbo back system - they all have cat-back and then I will have to spend extra on the other items like the dump pipe etc. All in all, it comes to over $1200.

Anywhere else I can check around melbourne?

just jap ...it'll be around $7-$800 for a 3" mild steel turbo back

$500 for just the cat back and canon....so they must only charge $2-300 for the front, and cat...

Hi Dezz,

We actually do the full turbo back mild steel systems for Skyline and Silvia for $699 + Delivery

http://www.justjap.com/parts_nexhaust.htm

Regards,

Steve

Just Jap Auto Imports

groovy, whats the best you can do for just the cat back? WITHOUT a cat of course...

Hi Dezz,

We actually do the full turbo back mild steel systems for Skyline and Silvia for $699 + Delivery

http://www.justjap.com/parts_nexhaust.htm

Regards,

Steve

Just Jap Auto Imports

Hmm that looks pretty sweet mate, I''l be in for one in a few weeks. Is it worth spending the extra $250 and going stainless steel tho? What are the advantages?

Soz for the stupid noobie questions. But I'm more in the know when it comes to electronics. All this stuff is greek to me.

Edited by Liiger

My personal experiance with Xforce is nothing but drone.

Ive heard some that were not really TOO droney, but still pretty bad.

I am currently really happy with my Fujitsubo Legalis R and if i had a manual car, Id definatly go for the SUPER R

I think Just jap looks liek it is the go - after steve pm's me back, I will make my decision.

But hearing the sound from the mechanics silvia - i thought "bloody hell, that sounds awesome!!" Nice grunt to it when its on idle - like the car sounds like it means business...

i noticed more top end when i put mine on. didn't run out of puff as much at high rpm. all depends on how much boost you are running. with the stock exhaust it was really hard to get the car to hit the rev limiter as it would choke. now will full exhaust it does it easily (not that i try to), if i happen to give it a fang to try to beat traffic it is there in no time.

So you guys all are running x-force? I have been looking at other brands too like the fujitsubo front pipe and catback + matching hks dumppipe - but i have gotten a qoute of $2100 (im assuming the big brands are all around the high $1k or low $2k range). Is there any combinations that anyone could recommend perhaps? Like I keep hearing great stuff about BTMBL's stock, but I would need to get the other parts to complete the turbo back system. I know some brands can be mixed and matched (eg, fujitsubo + hks)- does anyone have a mix'n'matched system?

So you guys all are running x-force? I have been looking at other brands too like the fujitsubo front pipe and catback + matching hks dumppipe - but i have gotten a qoute of $2100 (im assuming the big brands are all around the high $1k or low $2k range). Is there any combinations that anyone could recommend perhaps? Like I keep hearing great stuff about BTMBL's stock, but I would need to get the other parts to complete the turbo back system. I know some brands can be mixed and matched (eg, fujitsubo + hks)- does anyone have a mix'n'matched system?

batmbl split front/dump. batmbl (CATCO) hi flow cat...and a cat back of your choice...thats all you need

ill be selling my 3" tanabe cat back with oval muffler soon...

ebay dump, 3" front was already on the car, but think its pacemaker, x-force cat, x-force 3.5" cat back. if your are worried about the note then the x-force can be ordered with a different muffler, like an oval instead of the cannon.

Interesting topic, been following it from the start as i too am after an exhaust. Looking at gettin a BATML split dump, CATCO metal cat n cat back(not sure which one yet). I'd like a muffler with twin tip(preferably one that kinks up at the tip) or even a twin pipe system but dunno if that'll fit into the 3" cat flange and finding a twin tip muffler or twin pipe is next to impossible. Anyone know where to get one of these?

Also does anyone know of any sites where u can hear exhaust notes with different exhaust systems?

Interesting topic, been following it from the start as i too am after an exhaust. Looking at gettin a BATML split dump, CATCO metal cat n cat back(not sure which one yet). I'd like a muffler with twin tip(preferably one that kinks up at the tip) or even a twin pipe system but dunno if that'll fit into the 3" cat flange and finding a twin tip muffler or twin pipe is next to impossible. Anyone know where to get one of these?

Also does anyone know of any sites where u can hear exhaust notes with different exhaust systems?

xforce has a twin tip system that kinks up...the part code is P-EX10, or another 1 from them is the PT01. they also have about 5 or 6 other twin tip mufflers, but without the kinked up tips

ok, so some the x-force is droney, others disagree... but everyone seems to agree that the Jap exhausts sound the shiz..

So what, in the design on the JDM exhausts, makes them sound good?

Cheap local exhaust shop 3" exhausst dont sound that bad either, just gotta get a good muffler. I had a mandrel bent 3" cat with a 3" pipe through it and a really big bodied junbl muffler. Not the best system in the world but it performed and sounded really nice, a little bit droney around 2k but another resonator would have fixed that up.

I think the biggest factor to sound is how many bends, what muffler and what resonator if it has one. I've heard stainless sounds different to mild steel as well.

Also does anyone know of any sites where u can hear exhaust notes with different exhaust systems?

I never had much success, I recommend going on a skyline cruise and get ahead and watch everyone drive by. Then ask the owner what system they have :nyaanyaa:

Edited by Rolls
xforce has a twin tip system that kinks up...the part code is P-EX10, or another 1 from them is the PT01. they also have about 5 or 6 other twin tip mufflers, but without the kinked up tips

Hmmm... checked out their site, doesnt seem to be there. Know of anywhere else i can see one of these twin tip mufflers? Anyone know wot the notes like on this muffler? Does x-force system also need a resonator/mid muffler?

Looking at puttin this on a R34 GT-T with Batml split dump n CATCO 3" metal cat.

Hmmm... checked out their site, doesnt seem to be there. Know of anywhere else i can see one of these twin tip mufflers? Anyone know wot the notes like on this muffler? Does x-force system also need a resonator/mid muffler?

Looking at puttin this on a R34 GT-T with Batml split dump n CATCO 3" metal cat.

you didnt look very hard then...

www.xforce.com.au

mufflers - oval style

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...