Jump to content
SAU Community

Recommended Posts

hmm bait then for a bigger fish ???? lol nah I found when i had fish as long as the tank was a bit dark for the first month they normally all survived. On top of checking the water constantly

BBLLLUUUGGGHHH!!!!

well i'm off to bundaberg 2morro for 2 whole damn weeks of glorious overtime and perpetual on call fun filled hijinx :)

i'll be sure to post some pics of the respray job when i get back tho!

keep on truckin yall :(

Yeah Isacc my car is sorta back together

Im gonna run the high flow at track day as i dont have the time to do the GT30...

My injectors have arrived too so im not waiting on any parts now. The new disc are in and the new pads and fluids are all done. The new clutch is in and biting hard and the car is now sporting a new 250rwkw figure...

In short i have a new company car and dont drive the skyline enough, but im liking the fuel economy im getting from the VZ...

I have a list of stuff ill be selling once the conversion is complete but until then its all being used...

I do have a heavy duty clutch and pressure plate with 70% meat still on it. Plus a full set of standard disc's and some brake pads with 90% meat still on em...

The new rotors are really good they just dont fade...

Its probably a combination of the disc, pad & fluid. But yeah i got the best brakes ive ever tried now...

well i'm pissed at the brake setup i have.. about a year ago i put in new dba slotted rotors and bendix ultimates, pads wore down after 12months and had eaten away at the discs (guessing due to the harsh metal content of the pads) to the point where they only just scraped through minimum thickness after a basic machining (werent warped either). I only did one trackday too :(

I have a list of stuff ill be selling once the conversion is complete but until then its all being used...

I do have a heavy duty clutch and pressure plate with 70% meat still on it. Plus a full set of standard disc's and some brake pads with 90% meat still on em...

hmmm well dont know if id go back to standard rotors unless i was being a tightarse, but i could be interested in the clutch - mines only a few months old but im convinced theres someting wrong with it, gotta get dan to have a look and see

Ill sell my clutch to ya for a carton of coronas... Cold of course... The clutch and pressure plate was worth $600 when i bought them a year ago...

As for the rotors, anyone who wants the whole set and the pads can have them for a carton of caronas also...

The brake pads were $200 and still have 90% meat, and the rotors are worth a few bob i reckon...

But ill post up a for sale thread soon, when i have time...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...