Jump to content
SAU Community

Recommended Posts

rubbish....the old skewl days were awesome....if only someone from old skewl days was here they would remember teh days of charlie, slayer, smooth and squizz. And many other humerous ppl.

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

what about karen? oh wait, she's just old!

*runs and hides* :P

meh

charly's disappearing act is working a treat for everyone

heard of slayer's old days and wouldnt mind hearin more of them actually

only old skewler around now days is marc

im from 02 but i've changed users twice, when i changed plates....yea twas pretty funny back in the day. There are still a few old skoolers around, not many post very often though. The forum has gotten pretty huge!

Edited by 33NIZ
im from 02 but i've changed users twice, when i changed plates....yea twas pretty funny back in the day. There are still a few old skoolers around, not many post very often though. The forum has gotten pretty huge!

i aint changin my plates! these plates rock

best investiment i've had yet i think.

edG is old skewl?

i'd hide if i was u man

think my payin out of her bein old is gettin older then her anyway

:P

*whispers* already hiding john!

its ok, the real postwhore is back, me :(

mmmmmmmmm fatty goodness

your not fat! and your not good! no fatty goodness for you!

rubbish....the old skewl days were awesome....if only someone from old skewl days was here they would remember teh days of charlie, slayer, smooth and squizz. And many other humerous ppl.

SLAYER!!!!!!!!!

\m/

btw wheres glenn, hes never on here anymore and hes not on msn very often either!!!

Dunno, haven't seen much of him at all. I miss his gratuitous plugs for Chapman & Chapman :yes:

Eug is still pretty active

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...