Jump to content
SAU Community

Recommended Posts

Street sprints FTW

I am so in next year....I maintain that they were all taking the wrong line into the scary corner with the cement owies

one or 2 were taking a widish line, but i dare say the sight of the concrete barrier there waiting for a little mistake was too much :(

how awesome were those skylines though!!! :)

All this talk about GTR's and the cost to rebuild them is scaring me....... I think I will stick to my RB25 and see what I can get out of it safely. Plus paint it. Plus a new turbo. Plus new injectors.

Still cheaper than the GTR and any needed rebuild.

it certianly sucks ass dave, but i hope its worth it!

yea their tank was like $900, plus coral, pumps, water cooler, lights, food etc etc etc..... not to mention the fish lol....it's an expensive hobby...it'd piss me off if a fish died for no reason.

bryn u stupid fark when r u going to come to an sau event? all u ever do is post on here. :huh:

gatton street sprints was farking awesome!!! the hi octane 32 gtr was there and smashed everyone by 3 secs at least! :D

bryn u stupid fark when r u going to come to an sau event? all u ever do is post on here. :huh:

gatton street sprints was farking awesome!!! the hi octane 32 gtr was there and smashed everyone by 3 secs at least! :D

vids?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...