Jump to content
SAU Community

Recommended Posts

yeh they've run a 10.2, but i wouldnt get the support at a test session with cnj as i could with godzilla.

dunno, theres still a few months before it comes time to pick, so we'll see

yeah, i undestand where your coming from. It's easier to replicate someone elses setup and reap the benefits of their R&D dollars. I would do the same thing if i was in your position.

so ben, how far along are u with this 3ltr?

decided how far ur going with it? as in hp and rpm wise?

ive got dan tracking down a r32 25de head from his importer.

im just waiting a bit for the rest of it though cause i have a job interview on tuesday with mlc

ive got dan tracking down a r32 25de head from his importer.

im just waiting a bit for the rest of it though cause i have a job interview on tuesday with mlc

y a 25 head???

yeh 350 shouldnt be too hard with a gt35r, and 7000rpm is nice and safe :wave:

y a 25 head???

yeh 350 shouldnt be too hard with a gt35r, and 7000rpm is nice and safe :wave:

i want a R32 rb25de head cause i have confirmed all my stuff like cams injectors and exhoust manifold will bolt to it and bring costs down alot.

all that would be left is machine work, forged pistons and rods and dans labour

^^^^^^^^Ok its on the 26th next weekend, its a show, shine and swap meet. Its held at Pine Rivers Park at Strathpine. I think thats on the main drag going out to Petrie. Might be Gympie Rd.

It was posted here but it was closed for some unknown reason.

Edited by subzeroR33

Hello ladies,

Question for the day,

Looking at getting some HKS Cams/cam gears - should I do it with my set up

Hopefully i just picked up a HKS Low mount and trust ext. gate to go with my Biago turbo I am getting through Murnane cant remember much about the turbo exactly was initially going the smaller internally gated one but now with the new manifold I will be more than likely doing what slide was selling as a Biago T40 if you can remember what that was.

Fairly decent sized turbo so I’m guessing there will be a little lag to contend with

Current state: PFC, FMIC, full Exhaust,

Adding: Turbo, Manifold, Gate, 740cc Injectors, 040 Pump,

Considering: Cams / Cam Gears

If need be I will call murnane to get the details of the turbo but as far as I know he basicly will customise the turbo to application

And im asking in here cause the forced induction forum is full of wankers and is too messy to navigate/get an answer and i have come to value the oppinions of the regulars of the wasteland

Cheers,

Dan

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I hope it's actually possible. This is a write off in insurance world.
    • Yup. 2-way with shallow ramp angles. Still works.
    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
×
×
  • Create New...