Jump to content
SAU Community

Recommended Posts

i see your point, but when ever i have been looking at parts they always seem more expensive...and how much boost can you run on stock sr engine...i have heard of people running more the 1 bar on stock rb's. not saying that there is much different, and like always i am not sayin one is better then the other.

an sr is a new engine, better technology, but like an rb they have there down falls.

who you callin sexy.....whore man

Been looking at lots of parts lately and the SR ones are usually cheaper

Marki I ran 18psi for a year on my stock RB25 and the headgasket did not blow, 17 to 18psi is considered the limit

I ran 23psi on an unopened RB25. Buggered if I know how but it refused to die, I had another bottom end ready to go but I ended up not needing it. Certainly not something I'd recommend trying though :P I just did it because I considered the stock bottom end to be expendable lol

im actually soo use to him not picking up, i just leave messages, i get a supprise when he actually does pick up :P

really, ive never had dan miss a call from me.

i must be the favourite

Bishes *tips hat*

YEO!!!!

lol and pg2me

smich as

Been looking at lots of parts lately and the SR ones are usually cheaper

Marki I ran 18psi for a year on my stock RB25 and the headgasket did not blow, 17 to 18psi is considered the limit

times change i guess...this was a few years ago when i was.

hey Bunta i need advice on a 25 build.!!!

i see your point, but when ever i have been looking at parts they always seem more expensive...and how much boost can you run on stock sr engine...i have heard of people running more the 1 bar on stock rb's. not saying that there is much different, and like always i am not sayin one is better then the other.

an sr is a new engine, better technology, but like an rb they have there down falls.

who you callin sexy.....whore man

yeah but they dont recommend it..

ohh ive been waiting for this ready.. 18-24psi on the SR safely.. :P with standard head gasket... *runs from dan to avoid abusive language from listening to sheep on ns.com*

Bishes *tips hat*

hiya marc..

really, ive never had dan miss a call from me.

i must be the favourite

it didnt ring out..

im just saying in general.. the prices are cheaper for the unliked 4 bangers.. as in coilpanks cheaper GKtech have full turbo back exhaust for 400 new.. turbos are cheaper most of the time for say T2 flanges. pfcs are cheaper.. only cause they are more common on the SR u can pick up a redtop SR pfc for 4-600 and here a R33 gtst one goes for 1250 in a matter of hours.

also clutches and boxes cheaper.. diffs cheaper. yes they are weaker but less weight play a part in the design..

im just saying in general.. the prices are cheaper for the unliked 4 bangers.. as in coilpanks cheaper GKtech have full turbo back exhaust for 400 new.. turbos are cheaper most of the time for say T2 flanges. pfcs are cheaper.. only cause they are more common on the SR u can pick up a redtop SR pfc for 4-600 and here a R33 gtst one goes for 1250 in a matter of hours.

also clutches and boxes cheaper.. diffs cheaper. yes they are weaker but less weight play a part in the design..

b b b but they still sounds shit.....

:P:):rofl:

mine sounds like VTEC up high.. ahaha stupid exhaust..

hahahahahaha

I cant believe what i just read, there is something seriously wrong with you mark please consult a physician urgently

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome Chrome

bahahaha

thats the funniest thing uve said all week noel...

ok i admit black adn chrom look good but still prefer black face chrome lip.. not full face chrome.. and admit a hid kit would look horn..

hmm.. i might buy a cheapo shit box skyrine 32 and put a F20C into it... :P

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...