Jump to content
SAU Community

Recommended Posts

hmm i was in a toy shop today, and i almost bought some initial D toys :whoops: like 1;10 scale ae86 and rx7s etc :( 199 Ringet,

and i almost bought a 1;20 scale rxy which coems stock, but has parts included, liek front and rear bumper, side skitys, fake carbon bonnet, wing and decals and rims, and exhuast system lol all changable.

then i grew up and left :)

Check this out.

Sorry, didn't work.

And BTW, SARD injectors are one of the best injectors on the market. Just because they use collars on RB25 doesn't mean they are shit. RB20 and RB26 (decent engines) don't take collars. I would buy a SARD before a HKS or Nismo. Unless you have an RB25, then buy Nismo.

thats because thet are f**king POV spec

anything that is good will come with new seals Liz

NISMO FTW

I smell emo

hahaha

Insecure much?

nope just a good comeback i thought.. peace col *hugs*

Trying to find a tint shop who will tint the holden this weekend, but their all booked up... :whoops:

Dont really care how much it is, just want a tip top job with good quality film...

thers a mob next to ABS at the gabba.. best job ive ever seen.. we send the toyota cars ther

u suck at whoring

u suck.... FULL STOP

Check this out.

Sorry, didn't work.

And BTW, SARD injectors are one of the best injectors on the market. Just because they use collars on RB25 doesn't mean they are shit. RB20 and RB26 (decent engines) don't take collars. I would buy a SARD before a HKS or Nismo. Unless you have an RB25, then buy Nismo.

what do u recommend for SR20s i think they need collars for the SR

yes Marki SR's are side feed too, same as RB25's...

S15 have like 470cc injectors, so it could be a cheap upgrade for an rb25, however when i was in the market it was hard to get a set of 6 as everyone wants to sell 4.

Plus for the money I was able to buy a set of 6 nismo 550cc units brand new, which was far more fitting to my application in the end...

BTW Do you have a name for that tint joint???

yes Marki SR's are side feed too, same as RB25's...

S15 have like 470cc injectors, so it could be a cheap upgrade for an rb25, however when i was in the market it was hard to get a set of 6 as everyone wants to sell 4.

Plus for the money I was able to buy a set of 6 nismo 550cc units brand new, which was far more fitting to my application in the end...

BTW Do you have a name for that tint joint???

I think only JDM s15s have that size injector

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...