Jump to content
SAU Community

Recommended Posts

Awesome Andy

I had 4 through in total today to look and took 2 deposits...

Ones a back up buyer if first one falls through, everyone who looked didnt offer less than asking price which was nice...

put the rest o to me :) ha ha

That Nick guy with the kermit green ke70 with a roll cage is comming over and said I can drive his car... Should I see if I can brake a 4age?

lol you will have to do some clutch kicks though

WOW COls awake before 7am... :ninja:

MY HEAD IS KILLING ME!!!

Still got hang over from Saturday night, had 8 panadol yesterday and still no relief, maby i need to see a doctor today... Im in pain...

put the rest o to me :D ha ha

LOL One of the guys kept going on about how good R32's are and that the only reason he was buying an R33 was cause the RB20's are shit (in his words) and I told him about your car as mine was sold at this stage so had nothing to loose, but then he says yeah and the R32's dont have aig bags and with this much power I want air bags.... I laughed...

and may i ask where they are coming from?

Meaning what advertsing worked???

Well carsales was a waste of time as was trading post, all enquires came via SAU and word of month from SAU...

or did you mean why did I have 4 in one day all of a sudden???

Well thats simplly cause im working 6 day weeks atm due to the busy season in my industry. So I cued up all this weeks inspections for one day as this was the only suitable time for me.

However that said I was expecting 7 people to come yesterday as they indicated in pm's and only had 4 call in the morning as I asked them all to do.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...