Jump to content
SAU Community

Recommended Posts

How's the 180 coming along? Got an eta on when it'll be running again? Hope you removed the 'certain' sticker off the back though

lol yeh all stickers were removed pronto

well the f**ked sr is out and is sitting next to the rebuilt sr

ummm soo eta hopefully sunday if the nismo engine mounts arrive by thursday - so fingers crossed

:P

P52901321.jpg

the rebuilt sr is just out of the shot - but you get the idea

when you get the car baaaack :D party time :P

yeh matey, im wonderin what the power upgrade will feel like, i mean even in pretty much standard form the gtr is pretty quick, but i guess power delivery and response will be smoother after everythin is done,

next on list are Dan's Bilstein Suspension Kit and 18x10 +18 Work Emotion XD9's, comtemplating whether i should sell my Advans, considering theyr pretty rare, i would want atleast 3grand for them including pretty much brand new 255 tyres, what do u reckon tristan? fair price? also wondering if i shuld keep on , i saw a r33 gtr with stock gtr rims but coilovers and lowered, and it looks awesome, so mayb once i get the suspension the car will looks awesome with the advans , not sure though,

on a side note, is there a cruise for Australia Day, i remeber last year on Australia Day , i was wrapped in a Australian flag with fake southern cross tatoos walkin through the city pissed hahah, with poeple i didnt even know, and then got into a fight coz some guy started swinging at me bec i didnt have a cigarette for him, outside hungry jacks, knocked him out with jab punch and elbow hook, i had just started workin out bck then, so felt the need to test out muscles and my previously high school acquired boxing skills,

didnt end well, cops had a go at me, tellin me i shuld have facked off, coz if he was hurt badly i culd be taken to court for assualt, and i was under 18 bck then so even more trouble being drunk , they let me off though, i love coppers here, i showed respect and remorse so they left my anus alone hahah.

@adam - dude that fight shit is pretty cronic :P ummm as for your rims - idk what they are worth hey, everything seems to get going for cheap atm - your best bet is to just check out the forums to compare prices - but i say get suspension before new rims :D

There is a CLK Black Series parked out the front of my office and well, I have a hard on and this sticky stuff everywhere

http://www.mercedes-amg.com/webspecial/clk63blackseries/

http://www.timesonline.co.uk/tol/driving/j...icle6907705.ece

that fb photo is the funniest thing ive seen in days...

:D

Do want

Neighbor has one... I got to sit in it once... :)

I asked him to come to the SAU drag day, then said are you scared of being beaten by cars worth 20k... :)

time share?

yes for sex only tho...

Yea theres normally a southside cruise there. They normallly meet at Freedom around 7. Beck organized the last 1 so she might be going too.
Ohhhhh sexxxy
naaaww :)

Who's sexy? Beck :)? John :D ? Hahaha

Hope you're feeling better John.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...