Jump to content
SAU Community

Recommended Posts

Had a coilpack fail halfeay through. Couldn't fix it, drove home with 5 cylinders. VL is my mates car. First times he has had it on the road. Very farken slow car in the corners.

FYP

I'm beginning to think no one from T-Bar can drive...

this :P

The silvia was pretty special. loosing on the formation lap takes skill, Skill that Ive only seen once before from Graham in the V35 at lakeside.

Had a coilpack fail halfeay through. Couldn't fix it, drove home with 5 cylinders. VL is my mates car. First times he has had it on the road. Very quick car

was wondering where you were. Saw you for the first time on the roll out onto the track, then once as I came past waving :) where did you boys park? i was gonna say hello, but until we got rolling I wasnt even sure if you were there or not.

thats not my fav layout of track, those corners thru the "dipper" suck for any car

FYP

Ill definitely agree with you their, I must admit i was surprised how "Happy" a lot of the boys were going into the corners

was wondering where you were. Saw you for the first time on the roll out onto the track, then once as I came past waving :) where did you boys park? i was gonna say hello, but until we got rolling I wasnt even sure if you were there or not.

thats not my fav layout of track, those corners thru the "dipper" suck for any car

Hey Bodo, got in a fair few laps before i had to get off with coilpack drama.

I was the ginger haired bloke in the green shirt that came up to you before we started and said hi, had my mate Nick with me. Your 33 is very very clean mate, paintwork is in awesome condition and the bonnet wrap looks good

Only figured out who you were once i seen you in the A-Bomb, tbh i think its pretty cool.... My car not working properly annoyed me a fiar bit and left me in a poor mood come the end of the session

Im currently at work.... Was going to stay late for the drags, but come 4pm the weather was always going to go south so i drive home and my other mates stayed out there. The Bronze SS Ute from the happy laps session ran a 12.6. Chris VL didnt see the track due to an oil leak problem

12.6 is no slouch eh :)

I didn't actually get a chance to line it up

does hard. Makes 408rwhp. I had a "Private Road" run on the way down to the track and he got me rolling in 3rd..... Next run rolling in 2nd at about 65-70km mine roared away

morning all

Ill definitely agree with you their, I must admit i was surprised how "Happy" a lot of the boys were going into the corners

Hey Bodo, got in a fair few laps before i had to get off with coilpack drama.

I was the ginger haired bloke in the green shirt that came up to you before we started and said hi, had my mate Nick with me. Your 33 is very very clean mate, paintwork is in awesome condition and the bonnet wrap looks good

Oh I see, well it was good to meet you then. :)

cheers I do try and keep my car clean, despite the layer of bitumen spots all over it. and I payed enough for it to be straight :)

glad you had fun, and corners can be quite happy for those of us that don't have the power you boys have (nick thinks hes in your league, but hes actually down here with us) :P.

Ya didn't say hi to be :(

us northsiders don't mix well with Woomba riff raff

Im currently at work.... Was going to stay late for the drags, but come 4pm the weather was always going to go south so i drive home and my other mates stayed out there. The Bronze SS Ute from the happy laps session ran a 12.6. Chris VL didnt see the track due to an oil leak problem

4pm? still didnt see you afterwards. most people had gone, and the few cars that were left had been abandoned. I left at around 2:30

does hard. Makes 408rwhp. I had a "Private Road" run on the way down to the track and he got me rolling in 3rd..... Next run rolling in 2nd at about 65-70km mine roared away

skyrine FTW!

Morning bishes.

Can't believe I almost got scammed by some fagott using a hoax PayPal payment notification!

I had this a few months ago, looked quite legit.....I messaged paypal directly and they confirmed it was a scam.

Now a day of Playing Day

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...