Jump to content
SAU Community

Fhrxstudios Stagea Install

wolverine
 Share

Recommended Posts

fergo308 Rising Star

fergo308

Posted
Posted (edited)

Looks like yellow from here.

I've been racking my brain trying to find a way to make it a win-win with my own stereo install. my head unit went straight in,the splits in the front and rear doors were easy enough,the rears went straight in,the fronts needed some tricky brackets to mount the cross overs,and custom baffles to mount the mids,but weren't THAT hard.

what's got me stuffed is how am I going to get the rest into the car without permanently losing boot space or the spare wheel? I'm constantly moving large items in the back of my car,so it must retain pretty much the full volume in the rear.

I need to get two smallish amps,a 6 stacker,and a boxed 12" subwoofer into it somewhere.

there's a bit of room behind the N/SR quarter trim which will take a decently sized amp if you are patient with bracketry. that takes care of one.

the sub I'll have to make removeable,and will likely place it in a similar fashion to the above design. that's two.

anyone have any ideas for the stacker and other amp? they won't fit under the seats. I've yet to investigate what's behind the O/SR quarter trim other than the ATTESSA reservoir. I'm hoping I can squeeze the stacker in that corner,or possibly the amp. I MIGHT be able to fit the stacker in hanging on the under-side of the spare wheel cover,but I'm not sure if that will be rigid enough for it to not skip.

any ideas guys? what have you put into your cars so far?

Justin...

Edited by fergo308
wolverine Grand Master

wolverine

Posted
  • Author
Posted

fergo, the stacker i want to use will fit under the drivers seat but it won't go under the passenger seat. if you are looking for other places have a look under the floor next to the space saver, you may be able to squeeze something in there. alternatively remove the spacesaver and buy a can of tyre goop.

EGA the sub boxes are small vol enclosures(well spotted) with subs that are suited for very small enclosures, they work well with volumes down to 15L (although i'm not sure what vol these are at this point). the aim was to lose nothing behind the strut towers to keep as much of that space as possible.

we would probably never have laid the seats down but we need the larger opening that the rear door offers.

Terminal Grand Master

Terminal

Posted
Posted

i have open air subs in my car, so my sub box doesn't have a back on it. when my gallery is back up i'll show you my pics, but my box can be unplugged relatively easily and just slides out when i need the boot space.

Fhrx Rising Star

Fhrx

Posted
Posted
that sub box is a very neat install... not much volume to it but looks awesome

The enclosure gives 18.3 litres for each subwoofer. Based on the Thiele / Small's of the 27V2's this will return a Q of about 0.69. That will offer tight bass with a deep natural roll off but will still boom just enough to deal with the large interior of the wagon. :cheers:

oxford1327 Experienced

oxford1327

Posted
Posted

my s2 has a nissan stacker installed in the rear passenger side trim cavity but it has no disc cassette in it, id be willing to sell it if anyone wants it? theycan have it for 50bucks if they want it?

GoldZilla Grand Master

GoldZilla

Posted
Posted

My idea for a sub is to put a single 10" or 12" in a longish box along the driver's side between the strut tower and the tailgate.

I'm hoping to figure out a way to hinge it so I can stil get to the ATESSA reservoir and the small compartment next to it, and loading of the sub will be against the strut tower - the box will be angle-cut to kind of match the shape of the strut tower and face the sub towards it. It might be better to face the sub rearwards and load it against the tailgate, but I'm going for a stealth system, and having the sub showing every time you open the boot kinda defeats the purpose...

Hopefully I won't lose too much boot space this way, and I'll still be able to fold the seats down and use the length available.

My only issue now is money - I've got the front splits and they are ready to go in, but I'm kinda waiting to at least buy the rears as well and before I start the install...

fergo308 Rising Star

fergo308

Posted
Posted

Thanks for the advice Wolverine,I'll check out the space under the driver's seat. hopefully it's a little bigger in there than under the passenger side,which was too short by all of 5mm...

I've thought about dumping the micro-spare,but with the numerous punctures i've been getting over the last few months,I doubt I could live without one.

I would love to build the sub into the boot floor using the spare's cavity,but it just isn't practical,and anything I could fit in on top of the wheel is too small for a ZR12 woofer. it'll have to go into a removeable box.

what sized amps are you guys running,and where/how did you get them into the car?

Justin...

66yostagea Grand Master

66yostagea

Posted
Posted

IF?????? you want to get rid of the spare, why not mount it outside a'la 4WD

Think of the messarges you could put on the wheelcover. I'm pretty computer illiterate but I know some of you guys are good at artistic endevours.

Lets see some lateral thinking.

mike40sydney Experienced

mike40sydney

Posted
Posted

just a thort y not mount the amps and stacker in the sub box if you need to remove it just unplug and take out may need some fancy switching to set up speakers to run without the amp but im sure it could be worked out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...