Jump to content
SAU Community

Recommended Posts

Hey, I drive a VL (dont flame me, haha), and at the moment, a stock RB25det plus an automatic gearbox from an R33 GTST is being fitted.....

Sorry if this is the wrong forum, and I searched but could find anything, but, I just want to know what this gearbox is like to drive?

Please dont compare it to a manual, I just want to know if its good box for an auto, like does it change gears nicely, etc?

Also, what things normally go wrong with them, what common troubles do they get?

If someone can link me to a review of an automatic R33 GTST, maybe that would be helpful.

thanks

(edit: this should probably be in 'drivetrain and transmission forum, can this thread be moved?)

Edited by b1ancardi

well ive had my auto R33 GTST for 6 months now and its been pretty good, good as in, if you push pedal to floor it lets the engine rev right out to redline,

maybe its the ecu thats controlling that...i dont know, i know alota auto boxes on other cars refuse to let the engine even go near the reline mark.

but the auto box in the skyline is quite happy to do it.

gear changes are very smooth but it can be hard to stick to 70km mark as the turbo tends to want to make you accelerate and if you let go of the pedal you slow down too much.

Edited by R33TOM

ok mate.. remember these words before you read anything else - most on here drive manuals nad have never driven an auto skyline.. thus, they only have a preconceived idea that automatic skylines are shit without having driven one. obviously you know that's not the case, so be wary of what advice you wish to take as some posts will be opinions, while others will be opinions based on the fact that they drive/own an automatic skyline

having said that, i drive an automatic r32, which has a similar (if not the same) gearbox to the r33

troubles i have had in the last 3.5 years? none

how does it shift gears? it can flare on some gear changes but that also depends on the gearbox condition. it drives well for me and changes great 99% of the time

its like anything mechanical - it will last a long and happy life if you service it properly (every 20,000kms) and use it as it were intended

oh, btw, i have a transmission cooler attached to mine, and i believe it was a worthy investment at less than $100 from supercheap

i have read of people running over 200rwkw in rb25 automatics without a hitch :D i personally run 155rwkw through my rb20 auto and it loves it :)

good luck with the conversion,

Warren.

thus, they only have a preconceived idea that automatic skylines are shit without having driven one.

:D its ...ok. I ran it at the track a couple of times foot to the floor and it survived.

It's not so good at cornering fast, as it decides to drop the revs right when you need them...pronounced especially on the rb20.

Ive got an R33 Auto....

Havent had any problems with shifting, slipping etc and i give it a bit of punishment. (Not tooo much tho)

Can anyone else confirm for me.... If i drop the auto into 2 (as it just slides in without pressing the button) to get the revs up would that do much harm to the auto? ...kinda like dropiing down a gear if it was a manual.

I've got the stock auto cooler do you rekon i should upgrade?

Auto Rocks :woot:

A few old threads on the auto:

http://www.skylinesaustralia.com/forums/in...1entry1592531

You gotta filter out the biased and stereotypical replies and just read the worthwhile posts.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

the 2nd thread is a bit off-topic but still helpful, and you may as well do the job properly if ur in the middle of converting now anyway.

:(

Auto Rocks :D

A few old threads on the auto:

http://www.skylinesaustralia.com/forums/in...1entry1592531

You gotta filter out the biased and stereotypical replies and just read the worthwhile posts.

http://www.skylinesaustralia.com/forums/in...showtopic=59399

the 2nd thread is a bit off-topic but still helpful, and you may as well do the job properly if ur in the middle of converting now anyway.

:D

cool, thanks

well ive had my auto R33 GTST for 6 months now and its been pretty good, good as in, if you push pedal to floor it lets the engine rev right out to redline,

maybe its the ecu thats controlling that...i dont know, i know alota auto boxes on other cars refuse to let the engine even go near the reline mark.

It could also be the NVCS (nissan variable cam system), rb25's have vv-t on the intake cam.

The auto box is only a 4speed isn't it?

What rpm do you guys sit at on the freeway eg. 100-110 km/h?

well ive had my auto R33 GTST for 6 months now and its been pretty good, good as in, if you push pedal to floor it lets the engine rev right out to redline,

maybe its the ecu thats controlling that...i dont know, i know alota auto boxes on other cars refuse to let the engine even go near the reline mark.

but the auto box in the skyline is quite happy to do it.

gear changes are very smooth but it can be hard to stick to 70km mark as the turbo tends to want to make you accelerate and if you let go of the pedal you slow down too much.

agreed with all of that. i havnt had any problems with my new gearbox ( i hada replace my old one due to the reverse clutch dying, the drive gears were fine ). and yeah, tis quite easy to redline it and stuff. only problem is how low the revs drop when you take your foot off the pedal, sometimes not good. but apart from that its fine.

isnt it a 4sp with overdrive?

yes.

correct.

? really??

My auto is 1,2,D plus overdrive

ie its 3 gears and overdrive becomes 4th gear

the r33 auto box is very similar to the Patrol auto box.

Im going to mod mine soon with the MV Automatics (Blackwood, SA) valve body upgrade for harder shifts. Already got a big oil cooler kit. Then she'll be sweeeeet.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
×
×
  • Create New...