Jump to content
SAU Community

Recommended Posts

i love my R34 GTR seats

the reason i would go for a factory seat over a aftermarket seat is because if u dont get em and the rails engineered your up for a fine and 3 demerit points in NSW

If that is the case then as a seat not originally intended for that model they must be engineered. There is one cop here in Vic that may know the difference who is distributing folders of detail and photos to other TMUs.

In Vic, having referred to the VASS (Engineering handbook) rules a seat not originally intended for the model must merely be ADR approved. There are some other details regarding range of motion and pre ADR crap but not pertinent at this stage.

I personally live in QLD so I am not familiar with interstate transport department rules. However I know that across the board that a modification plate isn't worth the metal they're made from, if the item installed isn't genuinely up to ADR specifications.

For example take this scenario:

My good friend "John Smith" has a welder at home, along with some off cuts of tube steel, and "Bob Stapleton" is a automotive engineer. Myself and John decide to make a set of rails to install a set of fixed back Recaros into my R32 GTR. We finish making the home made rails and take the car around to old mate Bob's workshop. He makes us a modification plate and rivets it to the firewall.

Honestly if "officer Leroy" was to seriously check these rails, and seats, they would never in a week of blue moons seriously meet ADRs. Some times the money you save on seats you will have to spend to bring their instillation up to scratch, and that's not even considering the value of your time and effort.

Ultimately what I am saying is that I would personally rather argue in court, if needed, that my new seats are a newer design factory Nissan seat, on factory Nissan rails, bolted to my factory Nissan floor with no need for modifications.

The R34 GTR seats are a fantastic bolt in upgrade to any post R31 model Skyline seat(s), bar the R34 GT-t. I am 6'2" and these seat are just perfect for me, they are seriously the best seats I have sat it. I have previously had sets of R32 & R33 GTR seats and as great as they are, the R34 items are still a couple of notches above them.

Good argument, and I agree with all points except the dodgy engineering. My personal beef with the GTR seats is they don't fit my upper back and shoulders leaving me with no upper back support in the middle.

Sounds like vehicle mod engineering in Qld is a bit lax. I decided not to take up VASS due to icRoads needing 3 types of insurance and the likely cost. Made it financially unworkable knowing I'm home to Qld soon but the cost of insurance means engineering in Vic is expensive. I intend to do engineering in Brisvegas if the requirements stack up.

The engineer has to be satisfied the frames and anchorages are at least able to meet ADR 3 with full documentation to the fact that he considers welds, joints and material up to the task.

If you consider a set of nice Recaros (around $1500 ea new) and baseframes to suit Skylines at around $300 each for a straight bolt in with ADR compliance then a couple of thousand for R34 seats is in effect good money depending on condition. Cheaply (or any) priced second hand Recaros are probably more rare than GTR34 seats or even GTR33 seats for that matter.

Sorry Geoff I must not have stated my must stance well. I was “talking” in generalisims, in no way was I referring to QLD modification system as being relaxed at; it would be a foolish to think this. The ADRs are there for a reason, and that’s for the safety of the vehicle occupants, which many people forget.

I was attempting to convey that just because you have a modification plate saying your rails does make your rails/seat install legal, for safe. As you have stated unless the rails, and seat, meet certain ADR guidelines that “certificate” may not be worth the paper it’s written on.

The financial difference between several seats, to that of a set of R34 GTR items, may only come down to a few dollars after the other seats are installed to meet ADR ruling. Therefore from a financial perspective there may not be much of a difference, however as you mentioned seats aren’t one size fits all, seat selection will really come down to the personal preference of the individual driving the vehicle.

personally i think that price is rediculous but hey the economic valve of what something is worth "something is work what someone is prepared to pay"

i guess here in nz we're lucky you really dont need any certs etc for seats and sr3 recaros are sold for as little as 400 bucks.

my sr3's from an evo3 i paid 400 for, finding rails to fit and lower them in the car enough to be safe to drive with (while still moving) is the next dilemma (am 6'1 and knees hit the wheel)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...